{"title":"3D Printer Accessories","description":null,"products":[{"product_id":"anycubic-wash-cure-3-plus-print-cleaning-and-drying-device","title":"AnyCubic Wash \u0026 Cure 3 Plus - Print cleaning and drying device","description":"\u003ch3\u003eAnyCubic Wash \u0026amp; Cure 3 Plus Print Cleaning and Drying Device\u003c\/h3\u003e\n\u003cp\u003eWash \u0026amp; Cure 3 Plus is a reliable washing and drying device that will allow you to take care of the proper finishing and curing of your prints. It features a large design that will easily accommodate even larger models. It is also distinguished by surprisingly quiet operation. You can also choose from different operating modes and manually adjust the cleaning or curing time.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg border=\"0\" src=\"https:\/\/assets.innpro.pl\/6092\/7155\/1.jpg\"\u003e\n\u003c\/p\u003e\u003ch3\u003eLarger capacity\u003c\/h3\u003e\n\u003cp\u003eThe product will allow you to easily clean even larger prints. The capacity of its basket is as much as 7.6 liters, and the total capacity of the cleaning module is as much as 12 liters. This is enough to accommodate models of different sizes! On the other hand, the dimensions of the curing area are ø220 x 260 mm.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg border=\"0\" src=\"https:\/\/assets.innpro.pl\/6092\/7155\/7.jpg\"\u003e\n\u003c\/p\u003e\u003ch3\u003eReliable curing\u003c\/h3\u003e\n\u003cp\u003eThanks to its carefully thought-out design and improved LED arrangement, the device guarantees excellent, even curing results. What's more, the set includes an innovative UV lamp with a bendable design, which provides an energy level of 30,000 μW\/cm2 and a radiation range of 1-3 cm. With its help, you can, for example, cure the details of your models.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg border=\"0\" src=\"https:\/\/assets.innpro.pl\/6092\/7155\/8.jpg\"\u003e\n\u003c\/p\u003e\u003ch3\u003eImproved basket design\u003c\/h3\u003e\n\u003cp\u003eThe device's basket is made of rust-resistant double-layer PP plastic, and it allows you to clean models placed on the platform. You can also choose from 2 available heights - 150 mm and 250 mm. This makes it easy to adjust the product to the size of your print and ensures maximum IPA efficiency - you only use as much as you actually need!\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg border=\"0\" src=\"https:\/\/assets.innpro.pl\/6092\/7155\/3.jpg\"\u003e\n\u003c\/p\u003e\u003ch3\u003eCure more models at the same time\u003c\/h3\u003e\n\u003cp\u003eYou'll also have a two-layer curing platform at your disposal so you can dry more models at the same time. This will save you time and avoid unnecessary use of the device!\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg border=\"0\" src=\"https:\/\/assets.innpro.pl\/6092\/7155\/6.jpg\"\u003e\n\u003c\/p\u003e\u003ch3\u003eEasy operation\u003c\/h3\u003e\n\u003cp\u003eThe device offers 3 modes to choose from - cleaning, curing, and FlexiCure enhanced curing using the included UV lamp. You can also manually adjust the cleaning or drying time between 1-30 minutes. Convenient operation of the Wash \u0026amp; Cure 3 Plus model is enabled by a built-in touch panel.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg border=\"0\" src=\"https:\/\/assets.innpro.pl\/6092\/7155\/4.jpg\"\u003e\n\u003c\/p\u003e\u003ch3\u003eQuiet operation\u003c\/h3\u003e\n\u003cp\u003eDon't worry that the noise generated by the device will interfere with your work or rest. The sealed design and optimized software of the Wash \u0026amp; Cure 3 Plus makes its volume level only about 65 dB. So you can enjoy peace of mind!\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg border=\"0\" src=\"https:\/\/assets.innpro.pl\/6092\/7155\/5.jpg\"\u003e\n\u003c\/p\u003e\n\u003ch3\u003eIncluded\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDevice for washing and drying prints\u003c\/li\u003e\n\u003cli\u003eCleaning module\u003c\/li\u003e\n\u003cli\u003eCleaning basket\u003c\/li\u003e\n\u003cli\u003eStick x4\u003c\/li\u003e\n\u003cli\u003eCuring table\u003c\/li\u003e\n\u003cli\u003eUV lamp with bendable design\u003c\/li\u003e\n\u003cli\u003eAllen wrench set\u003c\/li\u003e\n\u003cli\u003ePower supply\u003c\/li\u003e\n\u003cli\u003eUser manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eAnyCubic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eWS3LA0WH-Y-O\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUV light source\u003c\/th\u003e\n\u003ctd\u003e14 diodes 405 nm + lamp with adjustable design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOperation modes\u003c\/th\u003e\n\u003ctd\u003eCleaning, curing, FlexiCure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRated power\u003c\/th\u003e\n\u003ctd\u003e36 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput voltage\u003c\/th\u003e\n\u003ctd\u003e100-240 V 50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleaning \/ curing time adjustment\u003c\/th\u003e\n\u003ctd\u003e1-30 min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. dimensions of the model to be cured\u003c\/th\u003e\n\u003ctd\u003eø220 x 260 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. dimensions of the model to be cleaned\u003c\/th\u003e\n\u003ctd\u003eWith platform: 228 x 128 x 250 mm; Without platform: 228 x 128 x 260 mm;\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eControl panel\u003c\/th\u003e\n\u003ctd\u003eTouch buttons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial (cleaning basket, cleaning module, curing table)\u003c\/th\u003e\n\u003ctd\u003ePP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUV lamp height\u003c\/th\u003e\n\u003ctd\u003e380 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e312 x 267 x 434 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e5.7 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":59586008645957,"sku":"INP-42681","price":180.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0970\/8276\/9733\/files\/42681_6.jpg?v=1791209389"},{"product_id":"anycubic-wash-cure-3-print-cleaning-and-drying-device","title":"AnyCubic Wash \u0026 Cure 3 - Print cleaning and drying device","description":"\u003ch3\u003eAnyCubic Wash \u0026amp; Cure 3 print cleaning and drying device.\u003c\/h3\u003e\n\u003cp\u003eTake care of the proper finishing and curing of your 3D prints. The AnyCubic Wash \u0026amp; Cure 3 washing and drying device features an enlarged design that makes it great for models of different sizes. It allows cleaning both in a basket and with a platform. In doing so, it works surprisingly quietly and offers several operating modes to choose from. You can also manually adjust the cleaning and curing times.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg border=\"0\" src=\"https:\/\/assets.innpro.pl\/6098\/7160\/1.jpg\"\u003e\n\u003c\/p\u003e\u003ch3\u003eIt even accommodates larger prints\u003c\/h3\u003e\n\u003cp\u003eThe capacity of the device's basket is 3 l, and the total capacity of its cleaning module is as much as 4 l. Thus, with its help you can easily clean prints up to 165 x 100 x 180 mm (in the basket) or up to 165 x 100 x 165 mm (with the platform). On the other hand, the dimensions of the curing space are 160 x 180 mm.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg border=\"0\" src=\"https:\/\/assets.innpro.pl\/6098\/7160\/7.jpg\"\u003e\n\u003c\/p\u003e\u003ch3\u003eIdeal for curing\u003c\/h3\u003e\n\u003cp\u003eThe device is distinguished by its carefully thought-out design and optimized arrangement of LEDs to ensure comprehensive, even curing of models. You will also find in the set an additional UV lamp with a bendable design, which is distinguished by an energy level of 30,000 μW\/cm2 and a radiation range from 1 cm to 3 cm. With its help you will successfully cure, for example, selected details of prints.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg border=\"0\" src=\"https:\/\/assets.innpro.pl\/6098\/7160\/8.jpg\"\u003e\n\u003c\/p\u003e\u003ch3\u003eImproved design, higher efficiency\u003c\/h3\u003e\n\u003cp\u003eThe device's basket was made of rust-resistant double-layer PP plastic, and thanks to its improved design, it allows you to clean prints placed on the platform. It also allows you to choose from 2 heights - 100 mm and 165 mm. So you can adjust it to the size of your model to optimize IPA consumption.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg border=\"0\" src=\"https:\/\/assets.innpro.pl\/6098\/7160\/3.jpg\"\u003e\n\u003c\/p\u003e\u003ch3\u003eConvenient operation\u003c\/h3\u003e\n\u003cp\u003eThe device allows you to choose from 3 modes of operation, such as washing, curing and FlexiCure enhanced curing using the included UV lamp. You can also adjust the cleaning and drying time from 1 minute to 30 minutes. The Wash \u0026amp; Cure 3 model is operated with a convenient-to-use dial and touch-sensitive buttons.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg border=\"0\" src=\"https:\/\/assets.innpro.pl\/6098\/7160\/4.jpg\"\u003e\n\u003c\/p\u003e\u003ch3\u003eLow noise level\u003c\/h3\u003e\n\u003cp\u003eDon't be afraid of annoying noise. The Wash \u0026amp; Cure 3 model features a sealed design and optimized software, so it can deliver exceptional performance while keeping the noise level low - only about 65 dB. Relax or get on with your work while the device washes and cures your prints - nothing will disturb you.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg border=\"0\" src=\"https:\/\/assets.innpro.pl\/6098\/7160\/5.jpg\"\u003e\n\u003c\/p\u003e\n\u003ch3\u003eIncluded\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePrint washing and drying unit\u003c\/li\u003e\n\u003cli\u003eCleaning module\u003c\/li\u003e\n\u003cli\u003eCleaning basket\u003c\/li\u003e\n\u003cli\u003eStick x4\u003c\/li\u003e\n\u003cli\u003eCuring table\u003c\/li\u003e\n\u003cli\u003eUV lamp with bendable design\u003c\/li\u003e\n\u003cli\u003eAllen wrench set\u003c\/li\u003e\n\u003cli\u003ePower supply\u003c\/li\u003e\n\u003cli\u003eUser manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eAnyCubic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eWS3A0WH-Y-O\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUV light source\u003c\/th\u003e\n\u003ctd\u003e10 diodes 405 nm + lamp with adjustable design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOperation modes\u003c\/th\u003e\n\u003ctd\u003eCleaning, curing, FlexiCure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRated power\u003c\/th\u003e\n\u003ctd\u003e36 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput voltage\u003c\/th\u003e\n\u003ctd\u003e100-240 V 50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleaning \/ curing time adjustment\u003c\/th\u003e\n\u003ctd\u003e1-30 min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. dimensions of the model to be cured\u003c\/th\u003e\n\u003ctd\u003eø160 x 180 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. dimensions of the model to be cleaned\u003c\/th\u003e\n\u003ctd\u003eWith platform: 165 x 100 x 165 mm; Without platform: 165 x 100 x 180 mm;\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eControl panel\u003c\/th\u003e\n\u003ctd\u003eTouch buttons, dial\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial (cleaning basket, cleaning module, curing table)\u003c\/th\u003e\n\u003ctd\u003ePP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUV lamp height\u003c\/th\u003e\n\u003ctd\u003e285 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e216 x 217 x 310 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e2.7 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":59586009530693,"sku":"INP-42683","price":97.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0970\/8276\/9733\/files\/42683_1.jpg?v=1791209391"},{"product_id":"elegoo-mercury-xs-wash-cure-bundle","title":"ELEGOO Mercury XS Wash \u0026 Cure Bundle","description":"\u003ch3\u003eELEGOO Mercury XS 3D Print Washing and Curing Kit\u003c\/h3\u003e\n\u003cp\u003eThe ELEGOO Mercury XS is the ideal solution for processing 3D prints, making it easy to both wash and cure resin models. With this kit, you can achieve a perfect finish on your models, eliminating resin residue and ensuring optimal results. The product is designed with ease of use and safety in mind, making it fun and intuitive to use.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg border=\"0\" src=\"https:\/\/assets.innpro.pl\/10958\/12910\/4.jpg\"\u003e\n\u003c\/p\u003e\u003ch3\u003eWashing and curing in one\u003c\/h3\u003e\n\u003cp\u003eThe ELEGOO Mercury XS offers two modules: a washing station and a curing station, which allow for comprehensive finishing of 3D models. The washing module effectively removes resin residue, ensuring the model is clean and ready for curing. The curing module uses UV light to finally fix and strengthen the structure of the print. With this kit, your entire post-production process will become simpler and faster, without the need to purchase two separate devices.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg border=\"0\" src=\"https:\/\/assets.innpro.pl\/10958\/12910\/6.jpg\"\u003e\n\u003c\/p\u003e\u003ch3\u003eEven curing\u003c\/h3\u003e\n\u003cp\u003eThe curing station is equipped with adjustable L-shaped lights and a 360° rotating platform to ensure full UV coverage on each side of the model. In addition, 4 LEDs located under the platform and a Fresnel lens emit light with a fixed wavelength of 405 nm, ensuring even curing of even the most complex models.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg border=\"0\" src=\"https:\/\/assets.innpro.pl\/10958\/12910\/1.jpg\"\u003e\n\u003c\/p\u003e\u003ch3\u003ePrecision in hard-to-reach areas\u003c\/h3\u003e\n\u003cp\u003eThe kit also includes a handy UV lamp for curing the interiors and nooks and crannies of the model, which is especially useful for prints with complex shapes. The lamp is also great for models that need to be cured after assembly.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg border=\"0\" src=\"https:\/\/assets.innpro.pl\/10958\/12910\/5.jpg\"\u003e\n\u003c\/p\u003e\u003ch3\u003eEfficient cleaning of large models\u003c\/h3\u003e\n\u003cp\u003eThe ELEGOO Mercury XS offers as much as 7,000 ml of capacity in a sealed wash tank, allowing for easy cleaning of both large models and smaller printed parts at the same time. Such a large working space saves time and also increases the efficiency of the cleaning process, which is especially important when working on larger projects. For the Saturn 4 and Jupiter series, the mounting platform must be removed before cleaning. For other models, refer to the maximum cleaning height and determine if it is necessary to remove the platform.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg border=\"0\" src=\"https:\/\/assets.innpro.pl\/10958\/12910\/2.jpg\"\u003e\n\u003c\/p\u003e\u003ch3\u003eUV protection and automatic shutdown\u003c\/h3\u003e\n\u003cp\u003eThe transparent cover of the curing station blocks up to 99.9% of UV rays, which not only speeds up the curing process, but also protects the user's eyesight. In addition, a safety system turns off the UV light automatically when the cover is removed, minimizing the risk of UV exposure.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg border=\"0\" src=\"https:\/\/assets.innpro.pl\/10958\/12910\/7.jpg\"\u003e\n\u003c\/p\u003e\u003ch3\u003eEasy operation - everything under control\u003c\/h3\u003e\n\u003cp\u003eAn intuitive interface with a simple dial and button allows for easy operation of both washing and curing functions. The working time can be adjusted up to 30 minutes to suit the needs of a particular model. Simply hold down the dial for 3 seconds to start the device and quickly proceed with the processing.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg border=\"0\" src=\"https:\/\/assets.innpro.pl\/10958\/12910\/3.jpg\"\u003e\n\u003c\/p\u003e\n\u003ch3\u003eIncluded\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMercury XS Wash station\u003c\/li\u003e\n\u003cli\u003eMercury XS Cure curing station\u003c\/li\u003e\n\u003cli\u003eCuring lamp\u003c\/li\u003e\n\u003cli\u003eHandheld UV lamp\u003c\/li\u003e\n\u003cli\u003eAnti-UV cover\u003c\/li\u003e\n\u003cli\u003eWater tank\u003c\/li\u003e\n\u003cli\u003eProtective goggles\u003c\/li\u003e\n\u003cli\u003eWash basket\u003c\/li\u003e\n\u003cli\u003eAdapter\u003c\/li\u003e\n\u003cli\u003eOperating instructions\u003c\/li\u003e\n\u003cli\u003eTools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003ch3\u003eMercury XS WASH\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eControl method\u003c\/th\u003e\n\u003ctd\u003eKnob + button\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRated power\u003c\/th\u003e\n\u003ctd\u003e12W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput voltage\u003c\/th\u003e\n\u003ctd\u003e110V\/240V 50\/60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTime setting\u003c\/th\u003e\n\u003ctd\u003e0-30 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMachine size\u003c\/th\u003e\n\u003ctd\u003e255mm x 155mm x 385.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNet weight of the machine\u003c\/th\u003e\n\u003ctd\u003e2.27 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum cleaning volume\u003c\/th\u003e\n\u003ctd\u003ewith platform: 180mm x 121mm x 153mm; without platform: 201mm x 124mm x 255mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMercury XS CURE\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eControl method\u003c\/th\u003e\n\u003ctd\u003eKnob + button\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRated power\u003c\/th\u003e\n\u003ctd\u003e36W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput voltage\u003c\/th\u003e\n\u003ctd\u003e110V\/240V 50\/60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTime setting\u003c\/th\u003e\n\u003ctd\u003e0-30 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMachine size\u003c\/th\u003e\n\u003ctd\u003e246mm x 230mm x 363.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNet weight of the machine\u003c\/th\u003e\n\u003ctd\u003e2.4kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum curing size\u003c\/th\u003e\n\u003ctd\u003e200mm x 260mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"ELEGOO","offers":[{"title":"Default Title","offer_id":59586143650117,"sku":"INP-48319","price":139.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0970\/8276\/9733\/files\/48319_1.jpg?v=1791210443"},{"product_id":"elegoo-mini-heater-for-3d-printer","title":"ELEGOO Mini Heater for 3D Printer","description":"\u003ch3\u003eELEGOO Mini Heater for 3D Printer\u003c\/h3\u003e\n\u003cp\u003eELEGOO Mini Heater is a small but powerful device designed for ideal thermal stability during 3D printing. With intelligent temperature control, fast heating and efficient heat distribution, the Mini Heater ensures a smooth printing process, eliminating problems of adhesion, warping and poor layer bonding. The device is ideal for users who are looking for reliable thermal support to ensure that their prints always meet the highest quality standards.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg border=\"0\" src=\"https:\/\/assets.innpro.pl\/10961\/12916\/1.jpg\"\u003e\n\u003c\/p\u003e\u003ch3\u003eIntelligent temperature control\u003c\/h3\u003e\n\u003cp\u003eForget about manual temperature adjustments and heat spikes. ELEGOO Mini Heater is equipped with an intelligent automatic temperature control system that automatically turns on when the temperature drops below 25°C and turns off above that level. Such a function not only ensures thermal stability throughout the printing process, but also prevents problems such as model peeling or layer deformation, making printing hassle-free and comfortable.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg border=\"0\" src=\"https:\/\/assets.innpro.pl\/10961\/12916\/2.jpg\"\u003e\n\u003c\/p\u003e\u003ch3\u003eUnmatched speed and performance\u003c\/h3\u003e\n\u003cp\u003eThe Mini Heater uses advanced PTC technology to instantly achieve an optimal temperature of 25°C in the printer chamber. The PTC, or ceramic self-regulating element, ensures that the device will not overheat, further increasing the safety of use. With 120W of power, the Mini Heater heats up quickly while reducing energy consumption, making it an extremely energy-efficient choice.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg border=\"0\" src=\"https:\/\/assets.innpro.pl\/10961\/12916\/6.jpg\"\u003e\n\u003c\/p\u003e\u003ch3\u003eEfficient heat circulation\u003c\/h3\u003e\n\u003cp\u003eThanks to its 10,000 RPM fan, the Mini Heater provides fast and even heat distribution, eliminating hot spots and maintaining a constant temperature throughout the chamber. This airflow translates into better melting and deposition of material, which in turn results in higher quality and precision prints.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg border=\"0\" src=\"https:\/\/assets.innpro.pl\/10961\/12916\/3.jpg\"\u003e\n\u003c\/p\u003e\u003ch3\u003eOngoing temperature control\u003c\/h3\u003e\n\u003cp\u003eMini Heater offers real-time temperature tracking. This allows you to quickly detect potential problems and respond instantly, ensuring uninterrupted quality of work and confidence that every print will be produced at the highest level.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg border=\"0\" src=\"https:\/\/assets.innpro.pl\/10961\/12916\/9.jpg\"\u003e\n\u003c\/p\u003e\u003ch3\u003eEfficient air filtration\u003c\/h3\u003e\n\u003cp\u003eThe ELEGOO Mini Heater is also equipped with an air filtration system that helps maintain cleanliness inside the printer chamber. The filter removes impurities and improves the quality of the working environment, which not only protects the printer, but also has a positive effect on the quality of the printout.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg border=\"0\" src=\"https:\/\/assets.innpro.pl\/10961\/12916\/8.jpg\"\u003e\n\u003c\/p\u003e\u003ch3\u003eReady to print in a few moments\u003c\/h3\u003e\n\u003cp\u003eWith a simple, intuitive installation process, the Mini Heater can be installed without too much effort. Just attach the adapter to the printer housing, connect it to the heater and that's it - the device is ready for use. ELEGOO Mini Heater provides a smooth start and allows you to quickly begin working on your next projects.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg border=\"0\" src=\"https:\/\/assets.innpro.pl\/10961\/12916\/7.jpg\"\u003e\n\u003c\/p\u003e\u003ch3\u003eIntegration with popular models\u003c\/h3\u003e\n\u003cp\u003eThe Mini Heater is compatible with many ELEGOO printers, including the Mars 5 Ultra, Mars 5, Mars 4 Max, Mars 4 DLP, Saturn 4, Saturn 4 Ultra, Saturn 3, Saturn 3 Ultra, Saturn 2, Saturn 8K, Saturn S and Jupiter SE models. Adaptability to other brands of printers makes the Mini Heater versatile and flexible - just check the size of the adapter and adjust the perforations on the printer housing for a perfect fit.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg border=\"0\" src=\"https:\/\/assets.innpro.pl\/10961\/12916\/4.jpg\"\u003e\n\u003c\/p\u003e\n\u003ch3\u003eIncluded\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eELEGOO Mini Heater\u003c\/li\u003e\n\u003cli\u003eAir filter x 2\u003c\/li\u003e\n\u003cli\u003eMounting adapter\u003c\/li\u003e\n\u003cli\u003ePower supply\u003c\/li\u003e\n\u003cli\u003eTool kit\u003c\/li\u003e\n\u003cli\u003eUser manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eELEGOO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eMini Heater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions of the device:\u003c\/th\u003e\n\u003ctd\u003e59 x 71 x 132 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilter dimensions:\u003c\/th\u003e\n\u003ctd\u003e40.5 x 40.5 x 23 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput voltage:\u003c\/th\u003e\n\u003ctd\u003e100-240V 50\/60Hz, 24V 5A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRated power:\u003c\/th\u003e\n\u003ctd\u003e120W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"ELEGOO","offers":[{"title":"Default Title","offer_id":59586143912261,"sku":"INP-48321","price":48.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0970\/8276\/9733\/files\/48321_1.jpg?v=1791210446"},{"product_id":"creality-cfs-filament-management-system","title":"Creality CFS filament management system","description":"\u003ch3\u003eCreality CFS multi-filament system\u003c\/h3\u003e\n\u003cp\u003eCreality CFS is an advanced multi-filament system that allows 3D printing in as many as 4 colors simultaneously (expandable to 16 colors), eliminating the need to paint models afterwards. Thanks to intelligent features such as automatic filament identification, smooth spool changes and abnormality detection, the printing process is seamless. An airtight design with moisture absorbers protects the filament from humidity, and an easy-to-read display allows you to monitor storage conditions in real time. Compatibility with Creality Hyper Series cardboard spools and practical solutions like the spring-loaded batten bar mechanism make the CFS an indispensable tool for any 3D creator.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/13237\/16246\/8.jpg\"\u003e\n\u003c\/p\u003e\u003ch3\u003eIntelligent print support and automation\u003c\/h3\u003e\n\u003cp\u003eCreality CFS allows printing with support materials that can be easily removed - either mechanically or by dissolving in water. This keeps the final model free of support marks, significantly improving the aesthetics and precision of the prints. Equipped with advanced sensors, the CFS system automatically detects any irregularities during printing. If a problem is detected, it immediately stops the job and informs the user, eliminating the risk of damaging the project. The function of automatic identification of the filament with RFID tags allows immediate recognition of the type, color and properties of the material, and for standard filaments, the information can be entered manually.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/13237\/16246\/5.jpg\"\u003e\n\u003c\/p\u003e\u003ch3\u003eSmooth operation without downtime\u003c\/h3\u003e\n\u003cp\u003eThe CFS system intelligently manages filament changes during multicolor printing. When a spool runs out, the device automatically switches to the next appropriate filament, minimizing waste and eliminating downtime. The automatic filament mapping function ensures full synchronization with Creality 3D printers and Creality Print software, making the printing process seamless.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/13237\/16246\/10.jpg\"\u003e\n\u003c\/p\u003e\u003ch3\u003eThoughtful design\u003c\/h3\u003e\n\u003cp\u003eThe airtight design of the CFS, supported by special moisture absorbers, effectively protects the filament from absorbing moisture from the air. A built-in temperature and humidity display allows ongoing monitoring of storage conditions, and the system alerts the user if the optimum humidity level is exceeded. A spring-loaded batten bar mechanism prevents the filament from popping out of the slot during printing, and compatibility with Creality Hyper Series cardboard spools means you can take advantage of eco-friendly solutions without additional adapters.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/13237\/16246\/6.jpg\"\u003e\n\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eCreality\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct name\u003c\/th\u003e\n\u003ctd\u003eCFS (Creality Filament System)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNumber of filament slots\u003c\/th\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRated power\u003c\/th\u003e\n\u003ctd\u003e20 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRated voltage\u003c\/th\u003e\n\u003ctd\u003eDC 24 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConnectivity\u003c\/th\u003e\n\u003ctd\u003eCFS: ≤4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct dimensions\u003c\/th\u003e\n\u003ctd\u003e379 × 314 × 276 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e4.56 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStatus indicators\u003c\/th\u003e\n\u003ctd\u003e4 (one for each slot)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrinting in multiple colors\u003c\/th\u003e\n\u003ctd\u003eSupported\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAutomatic filament switching\u003c\/th\u003e\n\u003ctd\u003eSupported\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRFID tag reading\u003c\/th\u003e\n\u003ctd\u003eSupported\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEnd of Filament Detection\u003c\/th\u003e\n\u003ctd\u003eSupported\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilament buffer\u003c\/th\u003e\n\u003ctd\u003eSupported\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMoisture-resistant storage\u003c\/th\u003e\n\u003ctd\u003eYes, with moisture absorbers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Films\u003c\/th\u003e\n\u003ctd\u003ePLA, ABS, PETG, ASA, PET, PA-CF, PLA-CF (incompatible with moisture resistant filaments, TPU95A and other flexible materials)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilament diameter\u003c\/th\u003e\n\u003ctd\u003e1.75 ± 0.05 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpool requirements\u003c\/th\u003e\n\u003ctd\u003eA 1 kg spool or any spool with a diameter of 197-202 mm and a width of 42-68 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"CREALITY","offers":[{"title":"Default Title","offer_id":59586183856453,"sku":"INP-51025","price":273.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0970\/8276\/9733\/files\/51025_3.jpg?v=1791210874"},{"product_id":"roidmi-sweeper-electric-control-dust-collector-tan","title":"Roidmi Sweeper Electric Control Dust Collector tan","description":null,"brand":"Roidmi","offers":[{"title":"Default Title","offer_id":59586235302213,"sku":"INP-53524","price":22.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0970\/8276\/9733\/files\/53524_1.png?v=1791211400"},{"product_id":"elegoo-mercury-plus-3-0-print-cleaning-and-drying-device","title":"ELEGOO Mercury Plus 3.0 print cleaning and drying device","description":"\u003ch3\u003eELEGOO Mercury Plus 3.0 print washing and drying device\u003c\/h3\u003e\n\u003cp\u003eELEGOO Mercury Plus 3.0 is a practical 2-in-1 device that combines the functions of washing and curing resin models. Thanks to the integrated design, the washing container can be stored directly in the curing module, which saves space and makes the workspace easier to organize. The whole process is now faster and more convenient than ever before!\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"urządzenie do mycia i suszenia wydruków na stole obok modelu 3D\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/17678\/23434\/2.jpg\"\u003e\n\u003c\/p\u003e\u003ch3\u003eEasy operation\u003c\/h3\u003e\n\u003cp\u003eAn intuitive touch panel with a digital display allows you to get started in no time. With its help, for example, you can quickly select the mode, set the time and start or stop the desired process.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"obsługa panelu dotykowego urządzenia do mycia i suszenia wydruków\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/17678\/23434\/8.jpg\"\u003e\n\u003c\/p\u003e\u003ch3\u003eMore capacity, more possibilities\u003c\/h3\u003e\n\u003cp\u003eThe new model offers a noticeably larger workspace than the previous generation. The volume of the IPA (Isopropyl Alcohol, isopropyl alcohol) container has increased from 3.5 l to as much as 7.5 l and allows you to wash prints with maximum dimensions of 214 × 135 × 180 mm (with platform) or 230 × 135 × 260 mm (without platform). In addition, the curing area has increased by about 460%, making it possible to process larger models or several prints simultaneously.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"utwardzanie modelu 3D w urządzeniu\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/17678\/23434\/3.jpg\"\u003e\n\u003c\/p\u003e\u003ch3\u003eFlexible operation modes\u003c\/h3\u003e\n\u003cp\u003eThe device allows you to wash models in two ways - in a suspended position (214 × 135 × 180 mm) or in a corrosion-resistant basket (230 × 135 × 260 mm). This allows you to match the cleaning method to the size and shape of your prints, minimizing the risk of damaging delicate parts.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"urządzenie do mycia i suszenia wydruków 3D z akcesoriami\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/17678\/23434\/1.jpg\"\u003e\n\u003c\/p\u003e\u003ch3\u003eFast and thorough cleaning\u003c\/h3\u003e\n\u003cp\u003ePOM (Polyoxymethylene, polyacetal) bearings ensure smooth rotation of the turbine, which speeds up water agitation and increases cleaning efficiency. In addition, the product is equipped with a special seal, so you don't have to worry about leaks.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"wydruk 3D utwardzany w urządzeniu z pomarańczową pokrywą\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/17678\/23434\/7.jpg\"\u003e\n\u003c\/p\u003e\u003ch3\u003eEffective 360° curing\u003c\/h3\u003e\n\u003cp\u003eThe rotating table evenly exposes the entire surface of the print to UV (ultraviolet) light, and the lower reflective light further enhances this effect. The Fresnel lens used disperses the rays evenly, resulting in better curing of intricate details. The product also offers a special yellow cover that stops ultraviolet radiation with an efficiency of up to 99.9%, which translates into greater safety of use.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"diody UV utwardzające wydruk 3D\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/17678\/23434\/6.jpg\"\u003e\n\u003c\/p\u003e\u003ch3\u003eEffects that are visible to the naked eye\u003c\/h3\u003e\n\u003cp\u003eAfter washing and curing, the models are no longer sticky and rough - the surface becomes smooth, clean and noticeably more detailed. This is not only a matter of aesthetics, but also more durable and ready for further processing, such as painting.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"dwa wydruki 3D – przed i po utwardzeniu\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/17678\/23434\/5.jpg\"\u003e\n\u003c\/p\u003e\u003ch3\u003eCompatibility without limits\u003c\/h3\u003e\n\u003cp\u003eELEGOO Mercury Plus 3.0 works with most popular 3D printers of the LCD (Liquid Crystal Display), DLP (Digital Light Processing) and MSLA (Masked Stereolithography) types. It's a universal solution that will work regardless of the brand and technology of your equipment.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"urządzenie do mycia u suszenia wydruków 3D obok pojemnika na IPA\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/17678\/23434\/4.jpg\"\u003e\n\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eELEGOO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003e50.101.059300\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWashing time range\u003c\/th\u003e\n\u003ctd\u003e0-30 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCuring time range\u003c\/th\u003e\n\u003ctd\u003e0-30 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eControl method\u003c\/th\u003e\n\u003ctd\u003eTouch buttons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRated power\u003c\/th\u003e\n\u003ctd\u003e48 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e100-240 V, 50\/60 Hz, 24 V, 2 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum size of washing model (with platform)\u003c\/th\u003e\n\u003ctd\u003e214 × 135 × 180 mm (L × W × H).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum size of washing model (without platform)\u003c\/th\u003e\n\u003ctd\u003e230 × 135 × 260 mm (L × W × H).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum curing area\u003c\/th\u003e\n\u003ctd\u003eØ250 × 290 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDevice dimensions\u003c\/th\u003e\n\u003ctd\u003e302.5 × 302.5 × 412.5 mm (L × W × H).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"ELEGOO","offers":[{"title":"Default Title","offer_id":59586267676997,"sku":"INP-54423","price":129.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0970\/8276\/9733\/files\/54423_1.jpg?v=1791211737"},{"product_id":"qidi-multifilament-system-for-plus-4","title":"QiDi Multifilament System for Plus 4","description":"\u003ch3\u003eQiDi Box Multi-Filament System for the Plus 4 Series\u003c\/h3\u003e\n\u003cp\u003eThe QiDi Box for the Plus 4 Series is a multi-filament system with 4 independent channels, designed for multicolor printing and working with various types of materials. The device supports 1.75 mm diameter filaments, automatic spool switching, drying up to 65°C during printing, temperature and humidity monitoring, and intelligent recognition of QIDI filaments via NFC. A single QIDI Box holds 4 spools, and when the system is expanded to 4 units, you can use up to 16 colors or materials, allowing you to complete more complex projects without frequent manual filament changes.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"Gray QIDI Box filament dryer with a transparent lid and four colored spools inside\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/24219\/31844\/1_ai-779fa0b8-e72d-467b-afd4-ffc04a53b9ac.jpg\"\u003e\n\u003c\/p\u003e\u003ch3\u003eFour independent channels and dual gearboxes\u003c\/h3\u003e\n\u003cp\u003eThe feed system uses dual gearboxes made of hardened steel and four separate 42-type stepper motors—one for each channel. The design is adapted for both popular filaments and more demanding composite materials reinforced with carbon or glass fiber. The QIDI Box supports, among others, PLA, PETG, ABS, ASA, PET, PA, PC, PVA, and BVOH (after drying), PP, POM, HIPS, TPU 64D, and select CF and GF materials.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"Visualization of the heating chamber in the QIDI Box filament dryer with spools illuminated in orange\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/24219\/31844\/2_ai-b244f627-68c2-4b18-be16-c45b78a0c66d.jpg\"\u003e\n\u003c\/p\u003e\u003ch3\u003eDrying up to 65°C and humidity control\u003c\/h3\u003e\n\u003cp\u003eThe QIDI Box allows for simultaneous filament drying and printing, with a maximum drying temperature of 65°C. An airtight storage compartment, combined with the option to use a desiccant, helps minimize the impact of moisture on the filament, which is particularly important for hygroscopic materials. Temperature and humidity are monitored in real time, and their values can be checked on the screen and in the QIDI Studio software.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"A man holding 3D-printed car models, including a yellow Xiaomi Ultra car, and a DJI camera\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/24219\/31844\/5_ai-6ceed5bb-9c1a-41c1-964b-0ee9ca53bb96.jpg\"\u003e\n\u003c\/p\u003e\u003ch3\u003eAutomatic Spool Change and Issue Detection\u003c\/h3\u003e\n\u003cp\u003eThe automatic filament refilling feature allows the printer to switch to a spare spool when the currently used material runs out. This feature reduces the risk of unnecessarily interrupting long prints while allowing for more efficient use of remaining material on spools. The system also monitors for filament shortages, tangles, and jams, enabling it to respond appropriately to issues with proper filament feeding.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"Diagram of the interior of the QIDI drying module with heating elements and an enlarged 3D model of them\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/24219\/31844\/10_ai-f9353c14-e6f4-4d1b-b340-8bd012295125.jpg\"\u003e\n\u003c\/p\u003e\u003ch3\u003eNFC and Printing with Support Materials\u003c\/h3\u003e\n\u003cp\u003eNFC support enables automatic recognition of compatible QIDI filaments and adjustment of their settings without the need to manually enter parameters. The QIDI Box’s multi-material design also allows for the use of a separate support filament, including materials designed to be easily snapped off or dissolved, which facilitates the printing of models with more complex geometries. However, for PVA and BVOH, the material must be properly dried before use.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"A spool of blue QIDI Ultra ABS-GF25 filament placed in the automatic feeder of a 3D printer\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/24219\/31844\/11_ai-7e2d5d1c-78af-4958-bece-ec61697eda75.jpg\"\u003e\n\u003c\/p\u003e\u003ch3\u003eCompatibility and Safety Precautions\u003c\/h3\u003e\n\u003cp\u003eNot every 1.75 mm filament is compatible with the QIDI Box. Among others, the system does not support TPE, standard TPU, TPU 95A, QIDI PAHT-CF, damp PVA and BVOH, certain Silk filaments (including PLA Silk), and glow-in-the-dark PLA, as well as other materials with excessive stiffness or flexibility. The device is also equipped with a smart PTC fuse and two temperature sensors that monitor operating conditions and automatically cut off the power supply upon detection of an abnormal temperature.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"Hands connecting two blue-green parts printed on a 3D printer\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/24219\/31844\/9_ai-fcb6e20f-be35-48f5-a663-6074a9d62709.jpg\"\u003e\n\u003c\/p\u003e\n\u003ch3\u003eIncluded in the set\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eQIDI Box for Plus 4\u003c\/li\u003e\n\u003cli\u003ePower cord\u003c\/li\u003e\n\u003cli\u003e8–4-pin signal cable\u003c\/li\u003e\n\u003cli\u003eBOX Hub signal cable\u003c\/li\u003e\n\u003cli\u003eBOX Hub\u003c\/li\u003e\n\u003cli\u003ePTFE tubing, 1000 mm × 5\u003c\/li\u003e\n\u003cli\u003eDesiccant packets × 4\u003c\/li\u003e\n\u003cli\u003ePTFE tube clamps x 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eQIDI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eBox\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003ctd\u003ePlus 4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDevice dimensions\u003c\/th\u003e\n\u003ctd\u003e357 × 300 × 234 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e4.35 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHousing Material\u003c\/th\u003e\n\u003ctd\u003eABS\/PC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNumber of Channels\u003c\/th\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Expansion\u003c\/th\u003e\n\u003ctd\u003eUp to 4 QIDI Box units with compatible accessories\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eChannel Indicators\u003c\/th\u003e\n\u003ctd\u003e4 independent indicator lights\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilament Diameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupported printing filaments\u003c\/th\u003e\n\u003ctd\u003ePLA, PETG, ABS, ASA, PET, PA, PC, PVA (dried), BVOH (dried), PP, POM, HIPS, TPU 64D, ABS-CF\/GF, PLA-CF\/GF, PETG-CF\/GF, PPS-CF, PET-CF\/GF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnsupported filaments\u003c\/th\u003e\n\u003ctd\u003eTPE, standard TPU, TPU 95A, QIDI PAHT-CF, moist PVA and BVOH, select Silk materials (including PLA Silk), PLA Glow-in-the-dark, and materials that are excessively stiff or flexible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupported materials during drying\u003c\/th\u003e\n\u003ctd\u003ePLA, ABS, ASA, PA, PC, PET, PETG, PPS, PLA Wood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum drying temperature\u003c\/th\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSimultaneous drying and printing\u003c\/th\u003e\n\u003ctd\u003eyes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAirtight filament storage\u003c\/th\u003e\n\u003ctd\u003eyes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTemperature and humidity monitoring\u003c\/th\u003e\n\u003ctd\u003eyes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNFC\/RFID\u003c\/th\u003e\n\u003ctd\u003eyes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilament monitoring\u003c\/th\u003e\n\u003ctd\u003edetection of tangles, jams, and filament shortages\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAutomatic switch to a spare spool\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible spool width\u003c\/th\u003e\n\u003ctd\u003e50–72 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible spool diameter\u003c\/th\u003e\n\u003ctd\u003e195–202 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e110 V or 220–240 V AC, 50\/60 Hz, depending on regional version\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum rated power\u003c\/th\u003e\n\u003ctd\u003e245 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"QiDi","offers":[{"title":"Default Title","offer_id":59586471821637,"sku":"INP-57465","price":232.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0970\/8276\/9733\/files\/57465_1_1.webp?v=1791213327"},{"product_id":"sunlu-filament-dryer-for-ams-bambu-lab","title":"Sunlu Filament Dryer for AMS Bambu Lab","description":"\u003ch3\u003eSunlu Filament Dryer for the Bambu Lab AMS\u003c\/h3\u003e\n\u003cp\u003eThe SUNLU AMS Heater is a smart filament dryer designed specifically as an upgrade for the top cover of the Bambu Lab AMS system (Generation 1). It allows you to dry filament and print simultaneously, eliminating the need for pre-processing the material. Thanks to rapid heating to 70°C in just 20 minutes, an advanced air circulation system, and intelligent humidity monitoring, the device significantly improves print quality. Its compact design, full compatibility with AMS, and support for up to 16 colors make this solution ideal for demanding 3D printing users.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"SUNLU AMS Heater against a nighttime landscape with the control panel visible\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/20654\/27467\/1.jpg\"\u003e\n\u003c\/p\u003e\u003ch3\u003ePrint and dry simultaneously—save time and achieve better results\u003c\/h3\u003e\n\u003cp\u003eForget about drying filament separately before printing. Thanks to integration with AMS, you can dry the material exactly when you use it. This means stable operating conditions throughout the entire printing process, fewer errors, and higher-quality models without additional steps.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"SUNLU AMS Heater mounted on a Bambu Lab printer and a set of several modules next to it\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/20654\/27467\/3.jpg\"\u003e\n\u003c\/p\u003e\u003ch3\u003ePrecise air circulation – even drying without the risk of overheating\u003c\/h3\u003e\n\u003cp\u003eA unique air channel system directs heat exactly where it’s needed—around the filament. This ensures effective and even drying while keeping AMS components, such as the feed motor, safe. You minimize the risk of material deformation and component overheating.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"SUNLU AMS Heater with visualization of hot air flow around the filaments\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/20654\/27467\/9.jpg\"\u003e\n\u003c\/p\u003e\u003ch3\u003eFast heating up to 70°C – ready in minutes\u003c\/h3\u003e\n\u003cp\u003eAn efficient heating system with PTC technology allows you to reach a temperature of 70°C in about 20 minutes. This is faster than traditional solutions, which translates to greater operational efficiency and shorter wait times before starting a print.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"Close-up of the filament heating system with a temperature reading of 70°C\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/20654\/27467\/5.jpg\"\u003e\n\u003c\/p\u003e\u003ch3\u003eSmart humidity control – filament always in perfect condition\u003c\/h3\u003e\n\u003cp\u003eThe rH mode automatically monitors humidity levels and reacts in real time. When humidity exceeds the set threshold (50% by default), the device begins drying, and when it drops to around 20%, it switches to standby mode. You can also adjust the range (25–50%) to suit your needs, ensuring optimal conditions for every material.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"Comparison of print quality using dry and damp filament on an elephant model\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/20654\/27467\/2.jpg\"\u003e\n\u003c\/p\u003e\u003ch3\u003eEasy installation – quick upgrade in 2 minutes\u003c\/h3\u003e\n\u003cp\u003eInstalling the device is extremely simple and requires no specialized tools or expertise. Just unscrew, mount, and tighten—the entire process takes about 2 minutes. It’s a quick way to improve the performance of your AMS.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"SUNLU AMS dryer mounted on a 3D printer against a backdrop of dynamic colorful streaks\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/20654\/27467\/4.jpg\"\u003e\n\u003c\/p\u003e\u003ch3\u003eMore possibilities, less space – ideal for multicolor printing\u003c\/h3\u003e\n\u003cp\u003eAfter installing the AMS Heater, you can use configurations of up to 16 colors without increasing the space required. This is a huge advantage for those working on complex projects and multi-material printing.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"A set of several SUNLU AMS dryers stacked on top of each other in two columns\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/20654\/27467\/7.jpg\"\u003e\n\u003c\/p\u003e\n\u003ch3\u003eIncluded in the set:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSUNLU AMS Heater module\u003c\/li\u003e\n\u003cli\u003eMounting hinges\u003c\/li\u003e\n\u003cli\u003eMounting screws\u003c\/li\u003e\n\u003cli\u003eAllen wrench\u003c\/li\u003e\n\u003cli\u003ePower cord\u003c\/li\u003e\n\u003cli\u003eUser manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eSunlu\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eHeater for AMS Bambu Lab\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct dimensions\u003c\/th\u003e\n\u003ctd\u003e363 × 278 × 131 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackage dimensions\u003c\/th\u003e\n\u003ctd\u003e415 × 316 × 190 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNet weight\u003c\/th\u003e\n\u003ctd\u003e1.7 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTemperature range\u003c\/th\u003e\n\u003ctd\u003e35–70°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeating time to 70°C\u003c\/th\u003e\n\u003ctd\u003eapprox. 20 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTime setting range\u003c\/th\u003e\n\u003ctd\u003e0–99 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHumidity display range\u003c\/th\u003e\n\u003ctd\u003e10–90% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum power\u003c\/th\u003e\n\u003ctd\u003e390 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRated power\u003c\/th\u003e\n\u003ctd\u003e220 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandby power consumption\u003c\/th\u003e\n\u003ctd\u003e0.6 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003eAC 110 V \/ 60 Hz or AC 220 V \/ 50 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum current\u003c\/th\u003e\n\u003ctd\u003e2.2 A (230 V) \/ 4.15 A (120 V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeating system\u003c\/th\u003e\n\u003ctd\u003ePTC + dual air circulation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHumidity control\u003c\/th\u003e\n\u003ctd\u003eAutomatic (starts above 50%, stops below 20%, adjustable between 25–50%)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003ctd\u003eBambu Lab AMS Generation 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003eDrying during printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Sunlu","offers":[{"title":"Default Title","offer_id":59586577858885,"sku":"INP-58642","price":127.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0970\/8276\/9733\/files\/58642_1.jpg?v=1791214032"},{"product_id":"creality-spacepi-x4l-filament-dryer","title":"CREALITY SpacePi X4L Filament Dryer","description":"\u003ch3\u003eCREALITY SpacePi X4L Filament Dryer\u003c\/h3\u003e\n\u003cp\u003e3D printing requires properly prepared filament. Even a small amount of moisture can compromise print quality, cause air bubbles, or result in poor layer adhesion. The Creality SpacePi X4L Filament Dryer is designed to keep the material in optimal conditions before and during printing. The device uses smart sensors, temperature control, and an intuitive touchscreen panel, making filament drying simple and precise.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"Filament dryer with a closed housing, colored spools, and a display.\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/20235\/26937\/1.jpg\"\u003e\n\u003c\/p\u003e\u003ch3\u003eSmart Temperature and Humidity Sensors\u003c\/h3\u003e\n\u003cp\u003eThe SpacePi X4L uses advanced sensors to monitor temperature and humidity inside the chamber. This allows the device to respond to even slight changes in parameters and maintain stable drying conditions. In practice, this means more uniform filament preparation, which translates to a more stable material flow during printing and better model quality.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"Filament dryer connected to two 3D printers with material feeding.\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/20235\/26937\/2.jpg\"\u003e\n\u003c\/p\u003e\u003ch3\u003eLCD touchscreen with operation control\u003c\/h3\u003e\n\u003cp\u003eThe device is operated via a clear LCD touchscreen. The new display design with an anti-static coating ensures good visibility even in cooler conditions. The panel allows you to quickly set the drying time and temperature, and the automatic mode selects the appropriate parameters on its own. You can also check the humidity level inside the device in real time on the screen.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"Filament dryer with visualization of heating and internal temperature control.\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/20235\/26937\/3.jpg\"\u003e\n\u003c\/p\u003e\u003ch3\u003eDouble insulation for safety\u003c\/h3\u003e\n\u003cp\u003eThe dryer’s housing is equipped with a double layer of insulation that retains heat inside the chamber. The drying temperature can reach up to 75°C, yet the outer part of the housing remains significantly cooler—around 60°C. This allows the device to be safely operated even while in use.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"Filament dryer with an open lid and three colored spools inside.\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/20235\/26937\/10.jpg\"\u003e\n\u003c\/p\u003e\u003ch3\u003eWide filament compatibility\u003c\/h3\u003e\n\u003cp\u003eThe Creality SpacePi X4L supports most popular filaments used in 3D printing. The device is compatible with 1 kg or 2 kg spools and filaments with diameters of 1.75 mm and 2.85 mm. The chamber accommodates spools with a diameter of up to 200 mm and a width of up to 150 mm, making it compatible with many materials used in 3D printers.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"Two filament dryers placed side by side with different spool colors.\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/20235\/26937\/4.jpg\"\u003e\n\u003c\/p\u003e\u003ch3\u003ePrecise time and temperature control\u003c\/h3\u003e\n\u003cp\u003eThe dryer allows you to set the temperature between 45 and 75°C and the operating time from 1 to 48 hours. This allows you to tailor the drying process to specific materials, such as PLA, PETG, TPU, or other filaments that require moisture removal before printing.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"A man operating the control panel of a filament dryer on a desk.\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/20235\/26937\/8.jpg\"\u003e\n\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eCreality\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eSpacePi X4L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct dimensions\u003c\/th\u003e\n\u003ctd\u003e382 × 290 × 270 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHousing material\u003c\/th\u003e\n\u003ctd\u003eABS \/ PA \/ PC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOperating temperature range\u003c\/th\u003e\n\u003ctd\u003e45–75°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying time\u003c\/th\u003e\n\u003ctd\u003e1 to 48 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRated power\u003c\/th\u003e\n\u003ctd\u003e340 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput voltage\u003c\/th\u003e\n\u003ctd\u003e220–240 V ~ 50\/60 Hz (UK \/ EU \/ AU \/ BR \/ CL \/ AR), 100–120 V ~ 50\/60 Hz (US \/ JP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilament diameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm \/ 2.85 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum spool diameter\u003c\/th\u003e\n\u003ctd\u003e200 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum spool width\u003c\/th\u003e\n\u003ctd\u003e150 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"CREALITY","offers":[{"title":"Default Title","offer_id":59586584412485,"sku":"INP-58991","price":110.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0970\/8276\/9733\/files\/58991_1.jpg?v=1791214097"},{"product_id":"ra2-pro-xtool-upgrades","title":"RA2 Pro xTool Upgrades","description":"\u003ch3\u003eRA2 Pro xTool Height Adjusters\u003c\/h3\u003e\n\u003cp\u003eThese practical height adjusters, measuring 97 × 67 × 46 mm, enable stable and precise height adjustment when working with the RA2 Pro module. They are designed to accommodate cylindrical objects with a diameter of up to 100 mm, expanding the device’s range of applications. The ability to set them in three positions (low, medium, and high) allows you to easily adapt the setup to a specific project, ensuring proper support and optimal machining conditions.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"White xTool device on a wooden stand\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/20522\/27322\/1.jpg\"\u003e\n\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003exTool\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eP5010265\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003ctd\u003exTool M1 RA2 Pro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e97 × 67 × 46 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupported diameter\u003c\/th\u003e\n\u003ctd\u003eUp to 100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"XTOOL","offers":[{"title":"Default Title","offer_id":59586605842757,"sku":"INP-59453","price":14.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0970\/8276\/9733\/files\/59453_1.jpg?v=1791214240"},{"product_id":"1064-nm-2w-infrared-laser-module-for-the-xtool-s1","title":"1064 nm 2W infrared laser module for the xTool S1","description":"\u003ch3\u003e1064 nm 2W Infrared Laser Module for xTool S1\u003c\/h3\u003e\n\u003cp\u003eThe xTool infrared laser module with a wavelength of 1064 nm and a power of 2 W is a precision tool designed for marking and engraving metals and everyday objects. It operates at speeds of up to 600 mm\/s and performs exceptionally well on materials such as gold, silver, copper, and titanium, allowing you to create detailed designs on jewelry, accessories, and other metal surfaces. Thanks to its high operating speed, the product accelerates project completion while maintaining precision and detail quality. This is the solution for those who want to expand their device’s capabilities with precise and efficient infrared laser engraving. The module is compatible with the xTool S1 engraver.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"The xTool 2W laser module mounted on the guide rail of a black cutting and engraving plotter.\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/20524\/27324\/2.jpg\"\u003e\n\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003exTool\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eP5010248\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLaser Type\u003c\/th\u003e\n\u003ctd\u003eInfrared\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWavelength\u003c\/th\u003e\n\u003ctd\u003e1064 nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e2 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003ctd\u003exTool S1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking Speed\u003c\/th\u003e\n\u003ctd\u003eUp to 600 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"XTOOL","offers":[{"title":"Default Title","offer_id":59586605973829,"sku":"INP-59454","price":707.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0970\/8276\/9733\/files\/59454_1.jpg?v=1791214241"},{"product_id":"xtool-safetypro™-ap2-pre-filter","title":"xTool SafetyPro™ AP2 Pre-filter","description":"\u003ch3\u003exTool SafetyPro™ AP2 Pre-filter\u003c\/h3\u003e\n\u003cp\u003eThe pre-filter is the first stage of the advanced, multi-stage filtration system in the xTool SafetyPro™ AP2 air purifier. It captures up to 90% of visible contaminants, such as dust, lint, and hair, effectively reducing the load on the subsequent filtration layers. This improves the efficiency of the entire purification system. It also stands out for its long service life of up to 100 hours. You don’t have to replace it very often!\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"Pre-filter for xTool SafetyPro AP2 on a gray background\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/20527\/27327\/3.jpg\"\u003e\n\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003exTool\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eP5010395\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilter Type\u003c\/th\u003e\n\u003ctd\u003ePre-filter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003ctd\u003exTool SafetyPro™ AP2 air purifier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eService Life\u003c\/th\u003e\n\u003ctd\u003eUp to 100 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"XTOOL","offers":[{"title":"Default Title","offer_id":59586606137669,"sku":"INP-59455","price":26.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0970\/8276\/9733\/files\/59455_1.jpg?v=1791214245"},{"product_id":"xtool-safetypro™-ap2-high-performance-filter","title":"xTool SafetyPro™ AP2 High-Performance Filter","description":"\u003ch3\u003exTool SafetyPro™ AP2 High-Efficiency Filter\u003c\/h3\u003e\n\u003cp\u003eThe high-efficiency filter is the final stage of the advanced, multi-stage filtration system in the xTool SafetyPro™ AP2 air purifier. It captures even the finest particles with impressive efficiency of up to 99.97%. It effectively eliminates dust, allergens, and viruses, helping to maintain clean and safe air while working. An additional advantage is its impressive service life—up to 300 hours.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"High-efficiency filter for xTool SafetyPro™ AP2 on a gray background\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/20530\/27330\/3.jpg\"\u003e\n\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003exTool\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eP5010399\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilter Type\u003c\/th\u003e\n\u003ctd\u003eHigh-Efficiency\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003ctd\u003exTool SafetyPro™ AP2 Air Purifier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiltration Efficiency\u003c\/th\u003e\n\u003ctd\u003e99.97%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLifespan\u003c\/th\u003e\n\u003ctd\u003eUp to 300 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"XTOOL","offers":[{"title":"Default Title","offer_id":59586606235973,"sku":"INP-59456","price":46.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0970\/8276\/9733\/files\/59456_1.jpg?v=1791214248"},{"product_id":"xtool-safetypro™-ap2-ultra-dense-carbon-filter","title":"xTool SafetyPro™ AP2 Ultra-Dense Carbon Filter","description":"\u003ch3\u003exTool SafetyPro™ AP2 Ultra-Dense Carbon Filter\u003c\/h3\u003e\n\u003cp\u003eThe ultra-dense carbon filter designed for the xTool SafetyPro™ AP2 air purifier effectively removes odors and volatile organic compounds. It boasts an efficiency rating of 97.97% and easily traps particles such as VOCs, HCO, CO, and SO₂, improving air quality in the workplace. Additionally, it features an exceptionally long service life—up to 300 hours.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"Ultra-dense carbon filter for xTool SafetyPro™ AP2 on a gray background\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/20533\/27333\/3.jpg\"\u003e\n\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003exTool\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eP5010398\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilter type\u003c\/th\u003e\n\u003ctd\u003eUltra-dense carbon filter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003ctd\u003exTool SafetyPro™ AP2 air purifier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiltration efficiency\u003c\/th\u003e\n\u003ctd\u003e97.97%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLifespan\u003c\/th\u003e\n\u003ctd\u003eUp to 300 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"XTOOL","offers":[{"title":"Default Title","offer_id":59586606367045,"sku":"INP-59457","price":46.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0970\/8276\/9733\/files\/59457_1.jpg?v=1791214250"},{"product_id":"xtool-safetypro™-ap2-medium-efficiency-filter","title":"xTool SafetyPro™ AP2 Medium-Efficiency Filter","description":"\u003ch3\u003exTool SafetyPro™ AP2 Medium-Efficiency Filter\u003c\/h3\u003e\n\u003cp\u003eThe medium-efficiency filter designed for the xTool SafetyPro™ AP2 air purifier is responsible for effectively removing fine particles, including PM2.5 and dust particles larger than 0.3 μm. It achieves 95% filtration efficiency and serves as a crucial stage in a multi-stage air purification system. It captures pollutants that were not trapped by the pre-filter, thereby increasing the effectiveness of subsequent filtration layers. Its long service life—up to 200 hours—is also noteworthy.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"Medium Efficiency Filter for xTool SafetyPro™ AP2 on a gray background\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/20534\/27334\/3.jpg\"\u003e\n\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003exTool\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eP5010396\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilter Type\u003c\/th\u003e\n\u003ctd\u003eMedium Efficiency\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003ctd\u003exTool SafetyPro™ AP2 Air Purifier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiltration Efficiency\u003c\/th\u003e\n\u003ctd\u003e95%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eService Life\u003c\/th\u003e\n\u003ctd\u003eUp to 200 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"XTOOL","offers":[{"title":"Default Title","offer_id":59586606465349,"sku":"INP-59458","price":36.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0970\/8276\/9733\/files\/59458_1.jpg?v=1791214252"},{"product_id":"auto-streamline™-belt-conveyor-for-the-xtool-f2-ultra","title":"Auto Streamline™ Belt Conveyor for the xTool F2 Ultra","description":"\u003ch3\u003eAuto Streamline™ Conveyor Belt for the xTool F2 Ultra\u003c\/h3\u003e\n\u003cp\u003eThe Auto Streamline™ belt conveyor for the xTool F2 Ultra engraver enhances the machine’s capabilities by expanding the working area from 220 × 220 mm to as much as 220 × 500 mm. This makes it possible to engrave larger items or work on multiple projects simultaneously without having to manually move the material. The automatic transport system enables smooth, continuous operation, which translates to significantly higher productivity and time savings in mass production.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt='xTool laser with a work area grid overlay and \"2X\" text above the belt feeder' border=\"0\" src=\"https:\/\/assets.innpro.pl\/20536\/27336\/1.jpg\"\u003e\n\u003c\/p\u003e\u003ch3\u003eAutomation and Increased Productivity\u003c\/h3\u003e\n\u003cp\u003eThe Auto Streamline™ system enables the creation of entire batches of products in a virtually hands-free manner—simply place the items on the conveyor belt, and the machine takes care of the rest. This solution works particularly well in mass production, where repeatability and speed of execution are key. It provides practical support for both small workshops and more demanding production applications.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"A photo collage showcasing engraved items: photo wall panels, wooden spoons, gold pendants, and business cards\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/20536\/27336\/4.jpg\"\u003e\n\u003c\/p\u003e\u003ch3\u003eSmart camera integration\u003c\/h3\u003e\n\u003cp\u003eIntegration with the camera system allows for easy preparation of designs and their precise placement on the material. This makes the batch production process fast and intuitive, while minimizing the risk of errors. Simply place the components on the conveyor and start the process to achieve consistent and accurate results.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"Laptop with open-source software for designing engravings on round coasters visible in the background\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/20536\/27336\/3.jpg\"\u003e\n\u003c\/p\u003e\u003ch3\u003eReady to use right away\u003c\/h3\u003e\n\u003cp\u003eThe Auto Streamline™ conveyor is pre-assembled and easy to use, allowing you to get started quickly—without complicated setup. It’s a solution that combines the performance known from industrial applications with the convenience of use in home or workshop settings. Whether you’re creating decorations, accessories, or functional items, you can work faster and more efficiently.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"A series of metal hip flasks engraved with deer antlers arranged on the xTool laser’s movable feeder\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/20536\/27336\/2.jpg\"\u003e\n\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003exTool\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eName\u003c\/th\u003e\n\u003ctd\u003eAuto Streamline™\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eP3010010\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003ctd\u003exTool F2 Ultra\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExtended work area\u003c\/th\u003e\n\u003ctd\u003e220 × 500 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"XTOOL","offers":[{"title":"Default Title","offer_id":59586606924101,"sku":"INP-59463","price":512.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0970\/8276\/9733\/files\/59463_1.jpg?v=1791214258"},{"product_id":"xtool-f2-ultra-uv-laser-engraver","title":"xTool F2 Ultra UV Laser Engraver","description":"\u003ch3\u003exTool F2 Ultra UV Laser Engraver\u003c\/h3\u003e\n\u003cp\u003eThe xTool F2 Ultra UV is an advanced 5W UV laser engraver with a wavelength of 355 nm, offering incredible precision, a working speed of up to 15,000 mm\/s, and positioning accuracy of 0.2 mm. With support for 3D engraving inside glass, a large working area of up to 200 × 200 mm (expandable to 200 × 500 mm), and a dual 48 MP camera system, the device delivers exceptional accuracy and versatility. This solution is designed for premium projects—from product personalization to the production of jewelry, ornaments, and much more.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"A man with curly hair looks at a glass cube engraved with a horse figure next to the xTool F1 Ultra engraver\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/20537\/27337\/7.jpg\"\u003e\n\u003c\/p\u003e\u003ch3\u003eMicron-level precision, no burn marks, and a perfect finish\u003c\/h3\u003e\n\u003cp\u003eThe use of 355 nm ultra-short-wavelength UV technology allows for a spot size of less than 10 μm, resulting in extremely detailed and sharp engravings. The laser operates with a precision that allows even the finest design elements to be reproduced, maintaining perfect edges without distortion. In practice, this means the ability to engrave jewelry, everyday items, or decorative elements with unparalleled precision. Furthermore, instead of generating heat, the UV laser uses photon energy to directly break molecular bonds. As a result, the material does not burn or deform, and the edges remain clean and smooth. Importantly, this process requires no additional surface preparation or post-engraving treatment, which shortens project turnaround times.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"Two wooden cubes engraved with the words “Keep The Moment” and a decorative pattern, held in his hands\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/20537\/27337\/4.jpg\"\u003e\n\u003c\/p\u003e\u003ch3\u003e3D engraving inside glass – an impressive effect\u003c\/h3\u003e\n\u003cp\u003eOne of the most interesting advantages of the F2 Ultra UV model is the ability to create three-dimensional designs inside glass without damaging its surface. Thanks to the technology used, the laser builds 3D structures inside the material, leaving the outer layer perfectly smooth. This solution allows you to create striking keepsakes, statuettes, or decorative elements.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"Three engraved items: a glass with an inscription, a glass cube with a horse figure, and a blue seahorse-shaped pendant\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/20537\/27337\/2.jpg\"\u003e\n\u003c\/p\u003e\u003ch3\u003eOne machine – virtually unlimited possibilities\u003c\/h3\u003e\n\u003cp\u003eThe xTool F2 Ultra UV supports a wide range of materials, such as crystal, acrylic, metal, wood, leather, ceramics, plastic, silicone, and rubber. It enables both glass engraving and cutting, rotary machining, and embossing. Additionally, it ensures high precision without the need for sandblasting or film. Thanks to 3D Curve™ technology, it is possible to precisely reproduce designs on irregular shapes, and optional 360° engraving support allows you to work on bottles, glasses, mugs, and other cylindrical objects.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"A collage of five photos showing personalized engraved items, including a glass cube with a photo and wedding rings\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/20537\/27337\/6.jpg\"\u003e\n\u003c\/p\u003e\u003ch3\u003eIntelligent camera system – maximum precision\u003c\/h3\u003e\n\u003cp\u003eThe xTool F2 Ultra UV utilizes the industry’s first UV system with two 48 MP cameras. This design ensures positioning accuracy of 0.2 mm, which is up to 60% higher than in single-camera systems. So you can perfectly align the design with the workpiece!\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"The xTool F2 Ultra UV laser engraver with a closed cover, control panel, and cable on a gray background\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/20537\/27337\/1.jpg\"\u003e\n\u003c\/p\u003e\u003ch3\u003eSoftware that simplifies creation\u003c\/h3\u003e\n\u003cp\u003eThe engraver works with the xTool Creative Space ecosystem (which includes tools such as xTool Studio and Atomm), making it easy to go from concept to finished product. The EasySet™ library with over 300 materials lets you get started without testing settings, and the Intelligent Path Planning feature optimizes laser paths, increasing efficiency by up to 300% and enabling simultaneous operation of multiple devices. The system also enables the conversion of 2D designs or text into 3D models using AI, making it easier to create impressive projects. Additionally, you gain access to the DesignFind platform with a database of over 5,000 ready-made designs, complete with files and instructions.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt='An engagement ring with a diamond in a blue box, with a close-up of the \"Forever Love\" engraving on the stone' border=\"0\" src=\"https:\/\/assets.innpro.pl\/20537\/27337\/5.jpg\"\u003e\n\u003c\/p\u003e\u003ch3\u003eHigh performance and fast project completion\u003c\/h3\u003e\n\u003cp\u003eOperating speeds of up to 15,000 mm\/s and a precise galvo system enable even the most complex projects to be completed in surprisingly short time. For example, engraving a metal necklace takes about 16 seconds, a silicone phone case—about 1 minute, and a pair of denim shorts—about 3 minutes. This is a real time-saver and an opportunity to scale up production without compromising quality.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"The xTool F2 Ultra UV laser engraver on a gray background\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/20537\/27337\/8.jpg\"\u003e\n\u003c\/p\u003e\u003ch3\u003eFlexible work area and operating modes\u003c\/h3\u003e\n\u003cp\u003eThe engraver offers two operating modes—surface engraving and internal 3D engraving. So you can easily adapt it to your current needs! What’s more, the standard work area is 200 × 200 mm, and with the optional conveyor, it can be expanded to 200 × 500 mm. This solution allows for larger projects and mass production.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"xTool F2 Ultra UV laser engraver with the top cover open, showing the interior of the device\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/20537\/27337\/9.jpg\"\u003e\n\u003c\/p\u003e\u003ch3\u003eSafe and convenient operation from the very first startup\u003c\/h3\u003e\n\u003cp\u003eThe Ultra UV model is designed for trouble-free operation in various environments. It features an automatic emergency stop function that enhances safety in the event of unforeseen situations. It also stands out for its advanced cooling system, which ensures stable and reliable operation even during intensive use. Add to that a reinforced housing that increases durability. Furthermore, the plug-and-play design allows you to start engraving quickly without complicated setup, so you can focus on completing projects and serving customers instead of wasting time preparing the equipment. Furthermore, the device’s enclosed design prevents laser radiation from escaping, and an emergency stop button allows you to immediately halt operation if necessary.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"A collage of seven photos showing various items with engravings: keys, a plaque, medals, pants, a bottle, and jewelry\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/20537\/27337\/3.jpg\"\u003e\n\u003c\/p\u003e\n\u003ch3\u003eIncluded\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003exTool F2 Ultra UV Laser Engraver\u003c\/li\u003e\n\u003cli\u003eTouch Controller\u003c\/li\u003e\n\u003cli\u003eFume Exhaust Tube\u003c\/li\u003e\n\u003cli\u003ePower Adapter\u003c\/li\u003e\n\u003cli\u003ePower Cable\u003c\/li\u003e\n\u003cli\u003eUSB cable\u003c\/li\u003e\n\u003cli\u003eWrench\u003c\/li\u003e\n\u003cli\u003eLadder panel\u003c\/li\u003e\n\u003cli\u003eL-shaped positioning element\u003c\/li\u003e\n\u003cli\u003eLint-free cloth\u003c\/li\u003e\n\u003cli\u003e2.5 mm screwdriver\u003c\/li\u003e\n\u003cli\u003eSurface engraving material kit\u003c\/li\u003e\n\u003cli\u003eInternal engraving kit\u003c\/li\u003e\n\u003cli\u003eQuick start guide\u003c\/li\u003e\n\u003cli\u003eSafety instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003exTool\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eF2 Ultra UV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLaser type\u003c\/th\u003e\n\u003ctd\u003e5 W UV 355 nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOperating mode\u003c\/th\u003e\n\u003ctd\u003eLaser engraving, laser cutting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupported materials\u003c\/th\u003e\n\u003ctd\u003eEngraving: glass, crystal, acrylic, wood, metal, leather, plastic, rubber, silicone, ceramics, and others\u003cbr\u003eCutting: paper, wood, plastic, glass, fabric, leather, and others\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking area\u003c\/th\u003e\n\u003ctd\u003eSurface engraving: 200 × 200 mm\u003cbr\u003eInternal engraving: 70 × 70 mm\u003cbr\u003eWith conveyor: 200 × 500 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePreview\u003c\/th\u003e\n\u003ctd\u003eSmart Camera Preview, High-speed Light Live Preview\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum operating speed\u003c\/th\u003e\n\u003ctd\u003e15,000 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum cutting capacity\u003c\/th\u003e\n\u003ctd\u003e15 mm (in multiple passes)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCameras\u003c\/th\u003e\n\u003ctd\u003eTwo 48 MP cameras\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAccuracy\u003c\/th\u003e\n\u003ctd\u003e0.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e294 × 429 × 520 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e22.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupported software\u003c\/th\u003e\n\u003ctd\u003exTool Studio\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOperating system\u003c\/th\u003e\n\u003ctd\u003eWindows, macOS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"XTOOL","offers":[{"title":"Default Title","offer_id":59586611380549,"sku":"INP-59483","price":4651.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0970\/8276\/9733\/files\/59483_1.jpg?v=1791214294"},{"product_id":"elegoo-neptune-4-4-pro-hardened-steel-nozzle-set-0-4-mm-x3-0-6-mm-x1-0-8-mm-x1","title":"ELEGOO Neptune 4 \/ 4 Pro Hardened Steel Nozzle Set (0.4 mm x3, 0.6 mm x1, 0.8 mm x1)","description":"\u003ch3\u003eELEGOO Neptune 4 \/ 4 Pro Hardened Steel Nozzle Set (0.4 mm x3, 0.6 mm x1, 0.8 mm x1)\u003c\/h3\u003e\n\u003cp\u003eThe set of hardened steel nozzles for ELEGOO Neptune 4 and 4 Pro printers allows you to adjust print parameters to specific needs thanks to five different diameter options: 0.4 mm (x3), 0.6 mm (x1), and 0.8 mm (x1). This configuration allows you to create detailed models as well as print larger parts faster. The sturdy construction ensures stable operation and precise filament feeding, while the included accessories facilitate maintenance and installation, allowing you to keep your printer in optimal condition and carry out subsequent projects without any issues.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"Five steel nozzles for a 3D printer, a wrench, a container, and two cleaning needles on a gray background\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/20475\/27275\/1.jpg\"\u003e\n\u003c\/p\u003e\n\u003ch3\u003eIncluded\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e0.4 mm nozzle x3\u003c\/li\u003e\n\u003cli\u003e0.6 mm nozzle x1\u003c\/li\u003e\n\u003cli\u003e0.8 mm nozzle x1\u003c\/li\u003e\n\u003cli\u003eCleaning needles x2\u003c\/li\u003e\n\u003cli\u003eWrench x1\u003c\/li\u003e\n\u003cli\u003eContainer x1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eELEGOO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003e50.204.0058\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eHardened steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNozzle diameters\u003c\/th\u003e\n\u003ctd\u003e0.4 mm x3, 0.6 mm x1, 0.8 mm x1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003ctd\u003eELEGOO Neptune 4 \/ 4 Pro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"ELEGOO","offers":[{"title":"Default Title","offer_id":59586614919493,"sku":"INP-59502","price":17.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0970\/8276\/9733\/files\/59502_1.jpg?v=1791214313"},{"product_id":"elegoo-neptune-4-series-filament-sensor","title":"ELEGOO Neptune 4 Series Filament Sensor","description":"\u003ch3\u003eELEGOO Neptune 4 Series Filament Sensor\u003c\/h3\u003e\n\u003cp\u003eThe original ELEGOO filament sensor, designed for Neptune 4 series 3D printers, monitors the presence of filament during printing. It helps you avoid unwanted interruptions in your work, which translates to greater reliability and better print results. This product is a factory-approved replacement, ensuring full compatibility and hassle-free installation in select models, such as the Neptune 4, 4 Pro, 4 Plus, and 4 Max.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"Black filament sensor for ELEGOO 3D printers on a gray background with a mirror reflection\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/20929\/27792\/1.jpg\"\u003e\n\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eELEGOO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003e20.203.0030\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eFilament Sensors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003ctd\u003eElegoo Neptune 3 Pro, Elegoo Neptune 3 Plus, Elegoo Neptune 3 Max, Elegoo Neptune 4, Elegoo Neptune 4 Pro, Elegoo Neptune 4 Plus, Elegoo Neptune 4 Max, Elegoo Centauri Carbon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"ELEGOO","offers":[{"title":"Default Title","offer_id":59586615017797,"sku":"INP-59508","price":17.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0970\/8276\/9733\/files\/59508_1.jpg?v=1791214314"},{"product_id":"hotend-do-elegoo-centauri-carbon-0-8-mm","title":"Hotend do ELEGOO Centauri Carbon 0.8 mm","description":"\u003ch3\u003eHotend for ELEGOO Centauri Carbon 0.8 mm\u003c\/h3\u003e\n\u003cp\u003eOriginal hotend for the ELEGOO Centauri Carbon 3D printer with a 0.8 mm nozzle. It allows for quick replacement of a worn-out or damaged module. It features an integrated design and is easy to install, allowing you to quickly get your printer back up and running.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"Hotend for ELEGOO Centauri Carbon 0.8 mm and two screws on a gray background\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/20493\/29351\/1.jpg\"\u003e\n\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eELEGOO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eHotend \/ heating module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNozzle Diameter\u003c\/th\u003e\n\u003ctd\u003e0.8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003ctd\u003eELEGOO Centauri Carbon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"ELEGOO","offers":[{"title":"Default Title","offer_id":59586615411013,"sku":"INP-59520","price":29.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0970\/8276\/9733\/files\/59520_3.webp?v=1791214315"},{"product_id":"elegoo-mars-5-printing-platform-1-unit","title":"ELEGOO Mars 5 printing platform (1 unit)","description":"\u003ch3\u003eELEGOO Mars 5 Build Plate (1 pc.)\u003c\/h3\u003e\n\u003cp\u003eThe ELEGOO Mars 5 build plate provides a solid foundation for resin-printed models, ensuring they adhere securely during the printing process. The refined design supports even alignment and secure positioning of the part in the printer, which translates to print accuracy and repeatability. Additionally, the compact design and well-thought-out mounting system facilitate installation and daily use, allowing you to quickly prepare the device for operation.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"ELEGOO Mars 5 Build Plate on a gray background\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/20495\/27295\/1.jpg\"\u003e\n\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eELEGOO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003e50.102.0145\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eBuild Plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003ctd\u003eELEGOO Mars 5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQuantity per Set\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"ELEGOO","offers":[{"title":"Default Title","offer_id":59586615476549,"sku":"INP-59521","price":43.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0970\/8276\/9733\/files\/59521_1.jpg?v=1791214317"},{"product_id":"elegoo-mars-5-resin-tank-1-pc","title":"ELEGOO Mars 5 Resin Tank (1 pc.)","description":"\u003ch3\u003eELEGOO Mars 5 Resin Tank (1 pc.)\u003c\/h3\u003e\n\u003cp\u003eThe resin tank for the ELEGOO Mars 5 ensures stable operating conditions during printing. Its metal construction guarantees durability and resistance to daily use, while the marked maximum fill level makes it easy to monitor the amount of material. The practical mounting system allows for quick and convenient installation of the accessory in the printer, streamlining operation and setup.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"ELEGOO Mars 5 resin tank on a gray background\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/20500\/27300\/1.jpg\"\u003e\n\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eELEGOO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003e50.102.0154\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eResin Tank\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003ctd\u003eELEGOO Mars 5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"ELEGOO","offers":[{"title":"Default Title","offer_id":59586615640389,"sku":"INP-59523","price":39.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0970\/8276\/9733\/files\/59523_1.jpg?v=1791214319"},{"product_id":"anycubic-resin-tank-for-photon-mono-4-4-ultra","title":"Anycubic Resin Tank for Photon Mono 4\/4 Ultra","description":"\u003ch3\u003eAnycubic Resin Tank for Photon Mono 4\/4 Ultra\u003c\/h3\u003e\n\u003cp\u003eThe Anycubic resin tank for the Photon Mono 4 and Photon Mono 4 Ultra 3D printers is a practical accessory that simplifies daily use of the printer and ensures stable resin storage during printing. The tank is equipped with FEP film, which works well with the resin and supports the proper printing process, and its lightweight design further facilitates handling and cleaning. As a result, it works well both as a replacement for a worn-out part and as an additional container that allows you to work without unnecessary interruptions.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/20771\/27591\/1.jpg\"\u003e\n\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eAnycubic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003ctd\u003ePhoton Mono 4, Photon Mono 4 Ultra\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eapprox. 449 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e261 × 173.5 × 72 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilm type\u003c\/th\u003e\n\u003ctd\u003eFEP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReservoir lid\u003c\/th\u003e\n\u003ctd\u003enone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeating function\u003c\/th\u003e\n\u003ctd\u003eno\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":59586646016325,"sku":"INP-59634","price":31.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0970\/8276\/9733\/files\/59634_1.jpg?v=1791214427"},{"product_id":"anycubic-build-plate-for-the-photon-mono-4","title":"Anycubic Build Plate for the Photon Mono 4","description":"\u003ch3\u003eAnycubic Build Plate for Photon Mono 4\u003c\/h3\u003e\n\u003cp\u003eThe Anycubic Build Plate for Photon Mono 4 is a sturdy component designed for precise resin printing. Its laser-engraved surface improves model adhesion right from the first layers, reducing the risk of the print peeling off during the printing process. The 230 × 149 × 98 mm design is well-suited to the device, ensuring easy installation and stability during use. Weighing 439 g, it strikes the right balance between durability and ease of use. The black finish further emphasizes the material’s durability and resistance to daily wear and tear.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"Two metal build plates for resin printers, one with an engraved herringbone pattern on the contact surface.\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/20772\/27592\/4.jpg\"\u003e\n\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eAnycubic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntended Use\u003c\/th\u003e\n\u003ctd\u003ework platform for a resin printer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003ctd\u003ePhoton Mono 4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eapprox. 439 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e230 × 149 × 98 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWork surface\u003c\/th\u003e\n\u003ctd\u003elaser-engraved for increased adhesion\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":59586646278469,"sku":"INP-59635","price":34.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0970\/8276\/9733\/files\/59635_1.jpg?v=1791214428"},{"product_id":"anycubic-heated-resin-tank-for-the-photon-mono-m7-max","title":"Anycubic Heated Resin Tank for the Photon Mono M7 Max","description":"\u003ch3\u003eAnycubic Heated Resin Tank for Photon Mono M7 Max\u003c\/h3\u003e\n\u003cp\u003eThe Anycubic Heated Resin Tank for Photon Mono M7 Max maintains a constant material temperature thanks to Smart Heating Resin technology, which improves resin flow and results in more accurate detail reproduction and fewer failed prints. The design, tailored to this specific printer model, facilitates installation and daily use, while the use of ACF film improves layer release and increases the component’s durability. This makes the entire printing process more stable and predictable, even for more demanding projects.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"Black, rectangular resin tank frame with a visible maximum level mark on the inner wall.\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/20773\/27593\/1.jpg\"\u003e\n\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eAnycubic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003ctd\u003ePhoton Mono M7 Max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1709 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e435 × 313 × 83 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeating function\u003c\/th\u003e\n\u003ctd\u003eSmart Heating Resin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilm type\u003c\/th\u003e\n\u003ctd\u003eACF Film\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eResin tank lid\u003c\/th\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":59586646376773,"sku":"INP-59636","price":117.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0970\/8276\/9733\/files\/59636_1.jpg?v=1791214430"},{"product_id":"anycubic-build-plate-for-the-photon-mono-m7-max","title":"Anycubic Build Plate for the Photon Mono M7 Max","description":"\u003ch3\u003eAnycubic Build Plate for the Photon Mono M7 Max\u003c\/h3\u003e\n\u003cp\u003eThe Anycubic Build Plate for the Photon Mono M7 Max is a solidly constructed black component that is fully compatible with this printer model, ensuring stable and trouble-free operation, and its weight of approximately 2600 g and package dimensions of 400 × 255 × 190 mm ensure adequate rigidity and user comfort; the specially treated work surface improves the adhesion of the first print layers, which means models adhere better to the platform and are less likely to peel off during operation, directly impacting print quality and consistency, while the durable metal construction withstands regular contact with resin and cleaning, ensuring the platform retains its properties for a long time.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"Three black metal build plates for the printer shown at an angle against a light background.\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/20776\/27596\/2.jpg\"\u003e\n\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eAnycubic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003ctd\u003eAnycubic Photon Mono M7 Max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003elaser-etched build plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eapprox. 2600 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackage dimensions\u003c\/th\u003e\n\u003ctd\u003e400 × 255 × 190 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":59586646638917,"sku":"INP-59637","price":92.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0970\/8276\/9733\/files\/59637_1.jpg?v=1791214431"},{"product_id":"screen-protector-for-the-photon-mono-m7-max-5-pack","title":"Screen Protector for the Photon Mono M7 Max (5-pack)","description":"\u003ch3\u003eScreen Protector for the Photon Mono M7 Max (5 pcs.)\u003c\/h3\u003e\n\u003cp\u003eThe screen protector for the Photon Mono M7 Max provides practical protection for the printer's screen against resin, scratches, and everyday wear and tear. It has been precisely tailored to the 13.6-inch display, effectively protecting the entire working surface without compromising user comfort. Its thin design (0.1 mm) ensures high light transmission, preserving print quality and detail accuracy. The set includes 5 pieces, allowing for convenient and quick replacement of the film as needed.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"Five sheets of transparent screen protector film with green tabs to facilitate application.\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/20861\/27689\/2.jpg\"\u003e\n\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eAnycubic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003ctd\u003ePhoton Mono M7 Max (Version C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eScreen diagonal\u003c\/th\u003e\n\u003ctd\u003e13.6 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilm thickness\u003c\/th\u003e\n\u003ctd\u003e0.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e206 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackage dimensions\u003c\/th\u003e\n\u003ctd\u003e320 × 190 × 20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQuantity in set\u003c\/th\u003e\n\u003ctd\u003e5 pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":59586647195973,"sku":"INP-59638","price":22.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0970\/8276\/9733\/files\/59638_1.jpg?v=1791214432"},{"product_id":"screen-protector-for-the-photon-mono-m7-pro-m7-5-pack","title":"Screen Protector for the Photon Mono M7 Pro\/M7 (5-pack)","description":"\u003ch3\u003eScreen Protector for Photon Mono M7 Pro\/M7 (5 pcs.)\u003c\/h3\u003e\n\u003cp\u003eThe screen protector for the Photon Mono M7 Pro\/M7 is a practical solution that protects the 3D printer’s screen from scratches, dirt, and mechanical damage, resulting in a longer device lifespan and fewer operational issues; thanks to its fit for the Photon Mono M7 Pro and M7 models, the film adheres well to the surface, does not peel off, and does not create air bubbles, and its thin structure does not affect the quality of the displayed image or the precision of prints; additionally, the set includes 5 pieces, so in case of wear, you can quickly replace the film without having to buy a new set.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"Five white protective films for smartphone screens with blue alignment stickers on top.\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/20778\/27598\/2.jpg\"\u003e\n\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eAnycubic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003ctd\u003ePhoton Mono M7 Pro, Photon Mono M7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eScreen diagonal\u003c\/th\u003e\n\u003ctd\u003e10.1 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003eapprox. 0.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackage dimensions\u003c\/th\u003e\n\u003ctd\u003e243 × 165 × 13 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eapprox. 266 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQuantity in set\u003c\/th\u003e\n\u003ctd\u003e5 pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":59586647327045,"sku":"INP-59639","price":19.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0970\/8276\/9733\/files\/59639_1.jpg?v=1791214434"},{"product_id":"anycubic-activated-carbon-filter","title":"Anycubic Activated Carbon Filter","description":"\u003ch3\u003eAnycubic Activated Carbon Filter\u003c\/h3\u003e\n\u003cp\u003eThe Anycubic Activated Carbon Filter is a practical solution that helps reduce unpleasant odors and pollutants generated during 3D printing with resins. Thanks to the use of high-density activated carbon, it effectively absorbs volatile substances, resulting in a more comfortable working environment in enclosed spaces. The filter’s appropriate thickness and lightweight design ensure it operates efficiently without overburdening the device, while simultaneously improving the air quality in its surroundings—a factor particularly important during longer printing sessions.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"Four black activated carbon filters with a dense mesh of small holes, arranged side by side on a light background.\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/20779\/27599\/2.jpg\"\u003e\n\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eAnycubic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003eapprox. 18 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eapprox. 17 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003ctd\u003eResin 3D printers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003ctd\u003eAnycubic AirPure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilter material\u003c\/th\u003e\n\u003ctd\u003eHigh-density activated carbon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":59586647392581,"sku":"INP-59640","price":11.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0970\/8276\/9733\/files\/59640_1.jpg?v=1791214435"},{"product_id":"air-filter-for-the-kobra-s1-s1-combo","title":"Air Filter for the Kobra S1\/S1 Combo","description":"\u003ch3\u003eAir Filter for the Kobra S1\/S1 Combo\u003c\/h3\u003e\n\u003cp\u003eThe air filter for the Kobra S1 and S1 Combo is a consumable component designed to capture dust and fine particles generated during the unit’s operation, helping to maintain a cleaner environment and ensuring proper functioning. It is designed to fit the specified models, facilitating quick installation and hassle-free replacement of the used filter, and its regular replacement helps maintain optimal performance and user comfort in daily use.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"A blue, rectangular air filter with a grainy texture and a visible weld at the top, on a light background.\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/20782\/27602\/2.jpg\"\u003e\n\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eAnycubic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eAir Filter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003ctd\u003eAnycubic Kobra S1; Anycubic Kobra S1 Combo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":59586647589189,"sku":"INP-59641","price":12.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0970\/8276\/9733\/files\/59641_1.jpg?v=1791214437"},{"product_id":"wiper-nozzle-for-kobra-s1-s1-combo","title":"Wiper nozzle for Kobra S1\/S1 Combo","description":"\u003ch3\u003eNozzle Wiper for Kobra S1\/S1 Combo\u003c\/h3\u003e\n\u003cp\u003eThe nozzle wiper for the Kobra S1\/S1 Combo is a simple yet useful component that automatically removes filament residue from the nozzle while the printer is running. This reduces debris buildup and improves the quality of the first layer—and, consequently, the entire print. Thanks to its compatibility with the Kobra S1 and S1 Combo models, installation is quick and hassle-free. Its compact dimensions (130 × 80 × 12 mm) and low weight (10 g) ensure that the component does not interfere with the device’s operation. At the same time, it enhances user comfort and the stability of the printing process.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"Rubber cleaning element for the printer nozzle, consisting of two dark gray parts with a light-colored roller.\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/20783\/27603\/1.jpg\"\u003e\n\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eAnycubic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003ctd\u003eKobra S1, Kobra S1 Combo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e10 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e130 × 80 × 12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":59586648080709,"sku":"INP-59642","price":12.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0970\/8276\/9733\/files\/59642_1.jpg?v=1791214438"},{"product_id":"anycubic-pei-plate-for-kobra-3-max-max-combo","title":"Anycubic PEI Plate for Kobra 3 Max\/Max Combo","description":"\u003ch3\u003eAnycubic PEI Build Plate for Kobra 3 Max\/Max Combo\u003c\/h3\u003e\n\u003cp\u003eThe PEI build plate for the Anycubic Kobra 3 Max \/ Max Combo is a practical solution that makes daily printing easier, as its surface ensures good adhesion of models during printing while allowing for easy removal once they have cooled down. The flexible design means that you only need to bend the plate slightly to easily peel off the finished part, which reduces the risk of damage. The PEI coating works well with popular filaments, so there’s no need to experiment with additional adhesives. This translates to ease of use and more consistent results, especially with larger prints, for which this series of printers was designed.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"Magnetic sheet with a textured surface for the printer, featuring a visible label indicating double-sided coating.\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/20785\/27605\/1.jpg\"\u003e\n\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eAnycubic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePEI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003ctd\u003eAnycubic Kobra 3 Max \/ Kobra 3 Max Combo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":59586648408389,"sku":"INP-59643","price":55.01,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0970\/8276\/9733\/files\/59643_3.jpg?v=1791214440"},{"product_id":"anycubic-cool-plate-build-plate-for-the-kobra-s1-s1-combo","title":"Anycubic Cool Plate Build Plate for the Kobra S1\/S1 Combo","description":"\u003ch3\u003eAnycubic Cool Plate Build Plate for the Kobra S1\/S1 Combo\u003c\/h3\u003e\n\u003cp\u003eThe Anycubic Cool Plate is a practical solution for those who want to improve print stability without having to work at high bed temperatures. Thanks to a special coating, PLA filament adheres well at around 45°C, which reduces the risk of models peeling off and improves print consistency, especially for smaller or more demanding projects. Lower operating temperatures also result in lower energy consumption, and the durable surface retains its properties longer, reducing the need for frequent replacement. Additionally, the plate gives the first layer a subtle matte finish, making the bottom of the model look aesthetically pleasing and blend better with the rest of the print.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"Blue, square build plate with manufacturer’s markings and temperature parameters on the edges.\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/20786\/27606\/1.jpg\"\u003e\n\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eAnycubic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003ctd\u003eAnycubic Kobra S1 and Kobra S1 Combo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eBuild plate for 3D printer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSurface\u003c\/th\u003e\n\u003ctd\u003eSpecial coating that increases PLA adhesion\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended operating temperature\u003c\/th\u003e\n\u003ctd\u003eapprox. 45°C for PLA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFirst layer finish\u003c\/th\u003e\n\u003ctd\u003ematte\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":59586648572229,"sku":"INP-59644","price":31.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0970\/8276\/9733\/files\/59644_1.jpg?v=1791214441"},{"product_id":"anycubic-smooth-build-plate-for-the-kobra-3-combo-v2-v2-combo","title":"Anycubic Smooth Build Plate for the Kobra 3\/Combo\/V2\/V2 Combo","description":"\u003ch3\u003eAnycubic Smooth Build Plate for Kobra 3\/Combo\/V2\/V2 Combo\u003c\/h3\u003e\n\u003cp\u003eThe Kobra 3 Combo, Kobra 3 V2, and V2 Combo, ensuring a perfect fit and hassle-free installation. The double-sided PEI coating combined with spring steel provides greater durability and resistance to high temperatures, which is important during intensive use. The smooth build surface improves first-layer quality, resulting in more aesthetically pleasing and precise prints. The plate is compatible with materials such as PLA, PETG, ABS, and TPU, allowing it to be used in both simple and more demanding projects.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"Black, smooth magnetic plate for the printer with Anycubic logos on the edges and material type markings.\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/20792\/27613\/1.jpg\"\u003e\n\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eAnycubic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003ctd\u003eKobra 3; Kobra 3 Combo; Kobra 3 V2; Kobra 3 V2 Combo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSurface\u003c\/th\u003e\n\u003ctd\u003eSmooth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoating\u003c\/th\u003e\n\u003ctd\u003ePEI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":59586648736069,"sku":"INP-59645","price":26.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0970\/8276\/9733\/files\/59645_1.jpg?v=1791214443"},{"product_id":"anycubic-smooth-build-plate-for-the-kobra-s1-s1-combo","title":"Anycubic Smooth Build Plate for the Kobra S1\/S1 Combo","description":"\u003ch3\u003eAnycubic Smooth Build Plate for Kobra S1\/S1 Combo\u003c\/h3\u003e\n\u003cp\u003eThe Anycubic Smooth Build Plate is designed specifically for the Kobra S1 and Kobra S1 Combo printers, ensuring a perfect fit and hassle-free installation. The double-sided PEI coating combined with spring steel provides greater durability and resistance to high temperatures, which is important for heavy-duty use. The smooth build surface improves first-layer quality, resulting in more aesthetically pleasing and precise prints. The plate is compatible with materials such as PLA, PETG, ABS, and TPU, allowing it to be used in both simple and more demanding projects.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"Black, smooth magnetic plate for the printer with Anycubic lettering on the edges and material type markings.\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/20794\/27616\/1.jpg\"\u003e\n\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eAnycubic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003ctd\u003eKobra S1 and Kobra S1 Combo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSurface\u003c\/th\u003e\n\u003ctd\u003eSmooth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoating\u003c\/th\u003e\n\u003ctd\u003ePEI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":59586648932677,"sku":"INP-59646","price":31.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0970\/8276\/9733\/files\/59646_1.jpg?v=1791214444"},{"product_id":"3d-effect-plate-octagon-diamond-for-kobra-3-3-combo-3-v2-3-v2-combo","title":"3D-effect plate (octagon + diamond) for Kobra 3\/3 Combo\/3 V2\/3 V2 Combo","description":"\u003ch3\u003e3D-Effect Build Plate (Octagon + Diamond) for Kobra 3\/3 Combo\/3 V2\/3 V2 Combo\u003c\/h3\u003e\n\u003cp\u003eThis double-sided 3D-effect build plate (octagon + diamond) for Anycubic Kobra 3 3D printers is an easy way to make your prints look better right away—without any extra post-printing work. Instead of a plain, smooth surface, you get a distinct, geometric pattern that gives your models a more refined look, especially for functional and decorative projects. With two different patterns on a single plate, you can quickly tailor the effect to a specific print—sometimes a subtle octagon, other times a more pronounced diamond—without changing settings or juggling additional accessories. The entire product is fully compatible with the Kobra 3, Kobra 3 Combo, Kobra 3 V2, and Kobra 3 V2 Combo models, so you simply install it, flip it over as needed, and print—the effect takes care of itself.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/20796\/27618\/1.jpg\"\u003e\n\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eAnycubic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eDouble-sided 3D build plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSurface pattern\u003c\/th\u003e\n\u003ctd\u003eOctagon \/ diamond\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003ctd\u003eAnycubic Kobra 3 \/ 3 Combo \/ 3 V2 \/ 3 V2 Combo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":59586649063749,"sku":"INP-59647","price":26.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0970\/8276\/9733\/files\/59647_1.jpg?v=1791214446"},{"product_id":"3d-effect-plate-phantom-sphere-for-kobra-3-3-combo-3-v2-3-v2-combo","title":"3D-effect plate (Phantom + sphere) for Kobra 3\/3 Combo\/3 V2\/3 V2 Combo","description":"\u003ch3\u003e3D-Effect Build Plate (Phantom + Sphere) for Kobra 3\/3 Combo\/3 V2\/3 V2 Combo\u003c\/h3\u003e\n\u003cp\u003eThis double-sided 3D-effect build plate (Phantom + Sphere) for Anycubic Kobra 3 3D printers is an easy way to make your prints look better right away—without any extra post-printing work. Instead of a plain, smooth surface, you get a distinct, geometric texture that gives your models a more refined look, especially for functional and decorative projects. With two different patterns on a single plate, you can quickly tailor the effect to a specific print—sometimes a subtle Phantom, sometimes a more pronounced sphere—without changing settings or juggling additional accessories. The entire product is fully compatible with the Kobra 3, Kobra 3 Combo, Kobra 3 V2, and Kobra 3 V2 Combo models, so you simply install it, flip it over as needed, and print—the effect takes care of itself.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"A plate with a dot and grid pattern that gives print surfaces a shimmering, rainbow-colored design.\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/20797\/27619\/1v2.jpg\"\u003e\n\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eAnycubic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eDouble-sided 3D build plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSurface effect\u003c\/th\u003e\n\u003ctd\u003ePhantom\/sphere\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003ctd\u003eAnycubic Kobra 3 \/ 3 Combo \/ 3 V2 \/ 3 V2 Combo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":59586649194821,"sku":"INP-59648","price":26.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0970\/8276\/9733\/files\/59648_2.jpg?v=1791214448"},{"product_id":"8-color-hub-for-ace-pro-kobra-3-combo-v2-combo-max-combo-s1-combo","title":"8-color hub for ACE Pro\/Kobra 3 Combo\/V2 Combo\/Max Combo\/S1 Combo","description":"\u003ch3\u003e8-color hub for ACE Pro\/Kobra 3 Combo\/V2 Combo\/Max Combo\/S1 Combo\u003c\/h3\u003e\n\u003cp\u003eThe 8-color hub for the ACE Pro, Kobra 3 Combo, V2 Combo, Max Combo, and S1 Combo is a compact accessory that allows you to conveniently use multiple filaments simultaneously, which directly translates to greater multicolor printing capabilities without the need for manual material changes; thanks to its small dimensions of 110 × 135 × 35 mm and weight of 22 g, it doesn’t take up much space, and its well-designed construction facilitates installation and organizes filament routing, which reduces the risk of tangling and helps maintain a stable, smooth printing process.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"A black, square connector with eight round contact holes, shown in close-up against a light background.\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/20800\/27625\/3.jpg\"\u003e\n\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eAnycubic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNumber of supported filaments\u003c\/th\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003ctd\u003eACE Pro, Kobra 3 Combo, V2 Combo, Max Combo, S1 Combo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e110 × 135 × 35 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e22 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":59586649260357,"sku":"INP-59650","price":19.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0970\/8276\/9733\/files\/59650_3.jpg?v=1791214449"},{"product_id":"anycubic-quick-change-hotend-with-a-0-6-mm-nozzle-for-the-kobra-s1-series","title":"Anycubic quick-change hotend with a 0.6 mm nozzle for the Kobra S1 series","description":"\u003ch3\u003eAnycubic Quick-Change Hotend with a 0.6 mm Nozzle for the Kobra S1 Series\u003c\/h3\u003e\n\u003cp\u003eThe Anycubic quick-change hotend with a 0.6 mm nozzle, compatible with the Kobra S1 and Kobra S1 Combo printers, is the component responsible for melting the filament and precisely feeding it onto the printer bed, allowing you to create 3D models layer by layer. Made entirely of hardened steel (All Metal Hardened Steel), it ensures high durability and wear resistance even with intensive use. Its compact dimensions of 114 × 91 × 26 mm and light weight of 45 g make installation easy without overburdening the printer mechanism, while the 0.6 mm nozzle diameter allows for combining precise details with fast filling of larger elements, offering versatility and convenience for every print project.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"Anycubic quick-change hotend with a copper nozzle, black heating block, and cable with a white plug.\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/20801\/27626\/1.jpg\"\u003e\n\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eAnycubic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003ctd\u003eKobra S1, Kobra S1 Combo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNozzle diameter\u003c\/th\u003e\n\u003ctd\u003e0.6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNozzle material\u003c\/th\u003e\n\u003ctd\u003eHardened steel (All Metal Hardened Steel)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e45 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e114 × 91 × 26 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":59586649620805,"sku":"INP-59651","price":17.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0970\/8276\/9733\/files\/59651_1.jpg?v=1791214451"},{"product_id":"anycubic-quick-change-hotend-with-a-0-8-mm-nozzle-for-the-kobra-s1-series","title":"Anycubic quick-change hotend with a 0.8 mm nozzle for the Kobra S1 series","description":"\u003ch3\u003eAnycubic Quick-Change Hotend with 0.8 mm Nozzle for the Kobra S1 Series\u003c\/h3\u003e\n\u003cp\u003eThe Anycubic quick-change hotend with a 0.8 mm nozzle, compatible with the Kobra S1 and Kobra S1 Combo printers, is the component responsible for melting the filament and precisely feeding it onto the printer bed, allowing you to create 3D models layer by layer. Made entirely of hardened steel (All Metal Hardened Steel), it ensures high durability and wear resistance even with intensive use. Its compact dimensions of 114 × 91 × 26 mm and light weight of 45 g make installation easy without overburdening the printer mechanism, while the 0.8 mm nozzle diameter allows for combining precise details with fast filling of larger elements, offering versatility and convenience for every print project.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"Anycubic quick-change hotend with a copper element, black housing, and wires on a light background.\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/20802\/27627\/1.jpg\"\u003e\n\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eAnycubic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003ctd\u003eKobra S1, Kobra S1 Combo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNozzle diameter\u003c\/th\u003e\n\u003ctd\u003e0.8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNozzle material\u003c\/th\u003e\n\u003ctd\u003eHardened steel (All Metal Hardened Steel)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e45 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e114 × 91 × 26 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":59586649686341,"sku":"INP-59652","price":17.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0970\/8276\/9733\/files\/59652_1.jpg?v=1791214453"},{"product_id":"anycubic-quick-change-hotend-with-a-0-6-mm-nozzle-for-the-kobra-3-max","title":"Anycubic quick-change hotend with a 0.6 mm nozzle for the Kobra 3 Max","description":"\u003ch3\u003eAnycubic Quick-Change Hotend with 0.6 mm Nozzle for Kobra 3 Max\u003c\/h3\u003e\n\u003cp\u003eThe Anycubic Quick-Change Hotend with 0.6 mm Nozzle for Kobra 3 Max is a practical solution for those who want to get back to printing quickly without the hassle of replacing parts. Thanks to its ready-to-use design with a factory-installed 0.6 mm steel nozzle, you can count on smooth installation and stable operation, which translates to less downtime and more consistent results. The larger nozzle diameter allows for faster printing and better handling of materials requiring higher flow rates, while the use of steel increases wear resistance, extending the lifespan of the entire hotend.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"Hi! Since you need specific and concise descriptions for HTML, I’ve prepared a suggestion that stays within the limit and avoids complicated terminology.  Here is the alt text for your image:  2.jpg: Anycubic quick-change hotend with a 0.6 mm size marking on the metal head.\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/20854\/27682\/2.jpg\"\u003e\n\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eAnycubic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003ctd\u003eKobra 3 Max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNozzle Type\u003c\/th\u003e\n\u003ctd\u003e0.6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNozzle Material\u003c\/th\u003e\n\u003ctd\u003estainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":59586650374469,"sku":"INP-59653","price":16.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0970\/8276\/9733\/files\/59653_1.jpg?v=1791214455"},{"product_id":"anycubic-quick-change-hotend-with-a-0-8-mm-nozzle-for-the-kobra-3-max","title":"Anycubic quick-change hotend with a 0.8 mm nozzle for the Kobra 3 Max","description":"\u003ch3\u003eAnycubic Quick-Change Hotend with 0.8 mm Nozzle for Kobra 3 Max\u003c\/h3\u003e\n\u003cp\u003eThe Anycubic Quick-Change Hotend with 0.8 mm Nozzle for Kobra 3 Max is a practical solution for those who want to get back to printing quickly without the hassle of replacing parts. Thanks to its ready-to-use design with a factory-installed 0.8 mm steel nozzle, you can count on smooth installation and stable operation, which translates to fewer downtimes and more consistent results. The larger nozzle diameter allows for faster printing and better handling of materials requiring higher flow rates, while the use of steel increases wear resistance, extending the lifespan of the entire hotend.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"Anycubic metal quick-change hotend with a visible 0.8 mm marking on the nozzle.\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/20857\/27685\/1.jpg\"\u003e\n\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eAnycubic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003ctd\u003eKobra 3 Max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e0.8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNozzle Material\u003c\/th\u003e\n\u003ctd\u003eStainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":59586650440005,"sku":"INP-59654","price":16.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0970\/8276\/9733\/files\/59654_1.jpg?v=1791214457"},{"product_id":"nfep-screen-protector-for-photon-mono-m5-m5s-m5s-pro-m7-pro-m7-10-1-inches-5-pieces","title":"NFEP Screen Protector for Photon Mono M5\/M5s\/M5s Pro\/M7 Pro\/M7 (10.1 inches\/5 pieces)","description":"\u003ch3\u003eNFEP Film for Photon Mono M5\/M5s\/M5s Pro\/M7 Pro\/M7 (10.1 inches\/5 sheets)\u003c\/h3\u003e\n\u003cp\u003eThe NFEP film for Photon Mono M5, M5s, M5s Pro, M7, and M7 Pro printers is a practical consumable with a thickness of 0.15 mm and high light transmittance of 95%, which results in more precise resin curing and better detail reproduction; the appropriate 10.1-inch size ensures a good fit and stable operation, while the flexible yet durable structure makes it easy to peel off prints, reducing the risk of damage; the 5-piece set allows for convenient replacement without frequent restocking.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"Several sheets of transparent, thin resin printer film stacked on a light background.\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/20803\/27628\/1.jpg\"\u003e\n\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003ctd\u003ePhoton Mono M5 \/ M5s \/ M5s Pro \/ M7 \/ M7 Pro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial Type\u003c\/th\u003e\n\u003ctd\u003eNFEP (resin printing film)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e10.1 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e0.15 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLight transmittance\u003c\/th\u003e\n\u003ctd\u003eapprox. 95%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQuantity per set\u003c\/th\u003e\n\u003ctd\u003e5 sheets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions of a single sheet\u003c\/th\u003e\n\u003ctd\u003eapprox. 315 × 220 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSet weight\u003c\/th\u003e\n\u003ctd\u003eapprox. 168 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":59586650702149,"sku":"INP-59655","price":41.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0970\/8276\/9733\/files\/59655_1.jpg?v=1791214458"},{"product_id":"anycubic-quick-change-fep-film-for-photon-mono-m5s-m5s-pro-m7-pro-m7-10-1-inches-5-sheets","title":"Anycubic Quick-Change FEP Film for Photon Mono M5s\/M5s Pro\/M7 Pro\/M7 (10.1 inches\/5 sheets)","description":"\u003ch3\u003eAnycubic Quick-Change FEP Film for Photon Mono M5s\/M5s Pro\/M7 Pro\/M7 (10.1 inches\/5 sheets)\u003c\/h3\u003e\n\u003cp\u003eThe Anycubic quick-change FEP film, with a diagonal of 10.1 inches, designed for the Photon Mono M5s, M5s Pro, M7, and M7 Pro printers, is a convenient solution that streamlines daily work with resin printing. Thanks to its quick-change design, it reduces the time needed for maintenance and device setup, allowing you to get back to printing more efficiently. The material offers good light transmission and flexibility, which ensures stable resin curing conditions and greater print precision. The set includes 5 sheets, so users have a long-term supply and don’t have to worry about replacing consumables frequently.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"Several sheets of transparent, thin film for resin printers arranged in layers on a light background.\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/20805\/27630\/1v.jpg\"\u003e\n\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eAnycubic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003ctd\u003eAnycubic Photon Mono M5s \/ M5s Pro \/ M7 \/ M7 Pro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDiagonal\u003c\/th\u003e\n\u003ctd\u003e10.1 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eFEP (fluorinated ethylene propylene)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":59586651095365,"sku":"INP-59656","price":48.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0970\/8276\/9733\/files\/59656_1.jpg?v=1791214460"},{"product_id":"anycubic-heat-pure-kit-eu-for-photon-mono-m5s-m5s-pro-m3-m3-max-x-6-pieces-4","title":"Anycubic Heat \u0026 Pure Kit (EU) for Photon Mono M5s\/M5s Pro\/M3\/M3 Max\/X (6 pieces\/4)","description":"\u003ch3\u003eAnycubic Heat \u0026amp; Pure Kit (EU) for Photon Mono M5s\/M5s Pro\/M3\/M3 Max\/X 6Ks\/4\u003c\/h3\u003e\n\u003cp\u003eThe Anycubic Air Heat \u0026amp; Pure (EU) Kit is a compact solution designed for Photon series resin printers, combining heating and air filtration functions to improve the device’s operating conditions and user comfort. Thanks to temperature stabilization inside the printer chamber, the resin behaves more predictably, which translates to more effective prints and a lower risk of errors, especially in cooler environments. At the same time, the included activated carbon filter (not included in the set) reduces the intensity of odors generated during printing, which is particularly noticeable during prolonged use in enclosed spaces. The compact, lightweight design ensures the device fits well in compatible models such as the Photon Mono M5s, M5s Pro, M3, or M3 Max without interfering with the build volume, and the included power supply and manual allow for quick setup without additional accessories.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"White Anycubic Heat \u0026amp; Pure kit with a black control panel, buttons, and ventilation openings.\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/20806\/27631\/1.jpg\"\u003e\n\u003c\/p\u003e\n\u003ch3\u003eIncluded\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnycubic Air Heat \u0026amp; Pure unit\u003c\/li\u003e\n\u003cli\u003ePower adapter\u003c\/li\u003e\n\u003cli\u003eUser manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eAnycubic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eAir Heat \u0026amp; Pure (EU)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003ctd\u003eAnycubic Photon Mono M5s \/ M5s Pro \/ M3 \/ M3 Max \/ X 6Ks \/ 4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilter\u003c\/th\u003e\n\u003ctd\u003ecarbon (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackage dimensions\u003c\/th\u003e\n\u003ctd\u003e230 × 205 × 110 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e658 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":59586651193669,"sku":"INP-59657","price":48.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0970\/8276\/9733\/files\/59657_1.jpg?v=1791214462"},{"product_id":"anycubic-build-plate-for-the-photon-mono-m7-pro-m7","title":"Anycubic Build Plate for the Photon Mono M7 Pro\/M7","description":"\u003ch3\u003eAnycubic Build Plate for the Photon Mono M7 Pro\/M7\u003c\/h3\u003e\n\u003cp\u003eThe Anycubic build plate designed for the Photon Mono M7 Pro and M7 models is a sturdy and practical solution that simplifies daily work with a 3D printer. Thanks to its laser-etched surface, it ensures better adhesion of prints, which reduces the risk of them peeling off during the process and results in more efficient printing. The black design is aesthetically pleasing and stain-resistant, and the carefully selected dimensions and weight ensure the platform is stable while remaining easy to install and use.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"Black Anycubic build plate with a smooth, flat surface and a mounting handle at the top.\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/20808\/27633\/1.jpg\"\u003e\n\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eAnycubic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e275 × 173 × 102 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e922 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003ctd\u003eAnycubic Photon Mono M7 Pro, Anycubic Photon Mono M7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSurface\u003c\/th\u003e\n\u003ctd\u003eLaser-engraved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":59586651357509,"sku":"INP-59658","price":43.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0970\/8276\/9733\/files\/59658_2.jpg?v=1791214463"},{"product_id":"anycubic-automatic-refill-kit-for-the-photon-mono-m7-pro-m7-max","title":"Anycubic Automatic Refill Kit for the Photon Mono M7 Pro\/M7 Max","description":"\u003ch3\u003eAnycubic Auto-Feed Kit for Photon Mono M7 Pro\/M7 Max\u003c\/h3\u003e\n\u003cp\u003eThe Anycubic Auto-Feed Kit for the Photon Mono M7 Pro and M7 Max is a practical solution that streamlines the resin printer experience and reduces the need for manual resin refills during printing. The auto-feed system ensures a constant supply of resin, making the printing process smoother and free of unnecessary interruptions—which is especially important for longer projects. Its tailored dimensions of 272 × 262 × 120 mm and weight of 711 g ensure the unit remains stable and integrates seamlessly with the printer. The kit includes a complete auto-feed module, a bottle cap, a user manual, and M3×8 mm mounting screws, allowing for quick installation without the need to purchase additional parts, while the design tailored to specific Anycubic models ensures seamless compatibility and convenience in daily use.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"White Anycubic device for automatic resin filling with a movable pumping element on the front.\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/20809\/27634\/1.jpg\"\u003e\n\u003c\/p\u003e\n\u003ch3\u003eIncluded in the set\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eauto-feed module (automatic filling unit)\u003c\/li\u003e\n\u003cli\u003ebottle cap with resin supply hoses and tubes\u003c\/li\u003e\n\u003cli\u003euser manual\u003c\/li\u003e\n\u003cli\u003eM3x8mm mounting screws\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eAnycubic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003ctd\u003ePhoton Mono M7 Max, Photon Mono M7 Pro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMain unit dimensions\u003c\/th\u003e\n\u003ctd\u003e272 × 262 × 120 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMain unit weight\u003c\/th\u003e\n\u003ctd\u003e711 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCap dimensions\u003c\/th\u003e\n\u003ctd\u003e272 × 91 × 82 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCap weight\u003c\/th\u003e\n\u003ctd\u003e147 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":59586651947333,"sku":"INP-59659","price":63.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0970\/8276\/9733\/files\/59659_1.jpg?v=1791214465"},{"product_id":"anycubic-resin-tank-for-the-photon-mono-m7-pro","title":"Anycubic Resin Tank for the Photon Mono M7 Pro","description":"\u003ch3\u003eAnycubic Resin Tank for the Photon Mono M7 Pro\u003c\/h3\u003e\n\u003cp\u003eThe Anycubic Resin Tank for the Photon Mono M7 Pro is designed for use with a large build volume and high-precision printing, featuring an integrated Smart Heating Resin system that stabilizes the temperature of the resin and improves layer-by-layer polymerization performance. The factory-installed ACF film features a lower adhesion coefficient and better peel strength compared to standard FEP films, resulting in less stress on the Z-axis and a smoother layer separation process. The tank’s dimensions, tailored to the device’s build platform, ensure even resin distribution and compatibility with rapid printing systems, which in turn translates to process stability and print repeatability.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"Anycubic resin tank in black, shown at an angle against a light background.\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/20810\/27635\/2.jpg\"\u003e\n\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eAnycubic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003ctd\u003ePhoton Mono M7 Pro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeating system\u003c\/th\u003e\n\u003ctd\u003eSmart Heating Resin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilm type\u003c\/th\u003e\n\u003ctd\u003eACF (Advanced Composite Film)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003eapprox. 353 × 323 × 180 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":59586652242245,"sku":"INP-59660","price":97.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0970\/8276\/9733\/files\/59660_1.jpg?v=1791214466"},{"product_id":"anycubic-build-plate-for-the-photon-mono-4-ultra","title":"Anycubic Build Plate for the Photon Mono 4 Ultra","description":"\u003ch3\u003eAnycubic Build Plate for the Photon Mono 4 Ultra\u003c\/h3\u003e\n\u003cp\u003eThe build plate for the Anycubic Photon Mono 4 Ultra printer is designed to ensure a stable and precise printing process, which directly translates to the quality of the models. The laser-etched surface improves the adhesion of the first layers, ensuring that prints adhere more securely to the bed and are less likely to peel off. The sturdy construction and carefully selected dimensions ensure easy installation and compatibility with the device, while not hindering cleaning or operation.\u003c\/p\u003e\n\u003cp\u003e\n\u003cimg alt=\"Print bed for a 3D printer with an engraved pattern and a black mounting element on the bottom.\" border=\"0\" src=\"https:\/\/assets.innpro.pl\/20815\/27640\/2.jpg\"\u003e\n\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eAnycubic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e439 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e230 × 149 × 98 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003ctd\u003eAnycubic Photon Mono 4 Ultra\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"ANYCUBIC","offers":[{"title":"Default Title","offer_id":59586652471621,"sku":"INP-59661","price":34.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0970\/8276\/9733\/files\/59661_2.jpg?v=1791214467"}],"url":"https:\/\/veno.ee\/collections\/type-3d-printer-accessories.oembed","provider":"veno.lt","version":"1.0","type":"link"}